New Zealand Online Car Parts

Phone or Text 027 7337410

Shopping Cart

close

No products in the cart.

Return to shop

New Zealand Online Car Parts

Shopping Cart

close

No products in the cart.

Return to shop
Phone or Text 027 7337410

Category: Additives

Additives

Showing all 14 results

  • CRC Fast Motor Flush 350ml

    5208

    Ex Supplier

    CRC Fast Motor Flush cleans the inside of engine and oil pan prior to carrying out an oil change. Due to today’s longer oil change intervals, there is an increased build-up of sludge, gums and varnishes inside the engine. It is extremely important that the engine be cleaned out thoroughly before installing fresh motor oil.

    Features & Benefits

    • Cleans engine and oil pan of sludge, gum and varnish build-up
    • Allows oil to flow freely from all parts of the engine
    • Helps free sticky valves and rings
    • Should be used prior to oil change especially if change interval has been exceeded
    • Recommended for use prior to engine overhaul
    • Harmless to metal parts
    • Suitable for petrol and diesel engines
    Add to cart
  • CRC Fuel Injector Cleaner Bottle 350 ml

    5036

    Ex Supplier

    CRC Fuel Injector Cleaner removes deposits from injector pintles to allow for better flow and more efficient operation. It cleans carburettors, intake systems, valves, ports and fuel lines, disperses water and improves fuel atomisation. It can reduce knocks caused by deposits and reduces engines’ demands for higher octane fuel. It is safe for use with …

    CRC Fuel Injector Cleaner Bottle 350 mlRead More

    Add to cart
  • Penrite Octane Booster 375ML

  • Morey’s Oil Stabiliser 1L

    MOS

    Ex Supplier

    Moreys Oil Stabiliser 1L

    Stabilizes engine oil Eliminates dry starts Improves fuel economy Reduces internal friction & engine wear Enhances oil oxidation inhibiting properties Fights rust & corrosion Increases power by improving cylinder compression Blends with any oil, grease, synthetic or petroleum

    Add to cart
  • Morey’s Diesel Smoke Killer 1L

    MDIC

    Ex Supplier

    Morey’s Diesel Smoke Killer

    Cleans dirty injectors and keeps them clean Increases horsepower by up to 10% Improves fuel economy to more than pay for itself Reduces emissions and smoke Reduces rust and corrosion Makes fuel filters last longer Reduces injector scuffing Increases fuel system life Does not raise sulphur or aromatic content Keeps seals soft and pliable Fights …

    Morey’s Diesel Smoke Killer 1LRead More

    Add to cart
  • Morey’s Upper Cylinder Lube 1L

    MUCL

    Ex Supplier

    Morey’s Upper Cylinder Lube 1L

    Cleans carburettors and injectors and keeps them clean Safe to use with catalytic converters and on older vehicles Improves fuel economy Improves compression by superior sealing Reduces emissions and smoke Reduces rust and corrosion and makes fuel filters last longer Reduces injector scuffing and increases fuel system life

    Add to cart
  • Penrite Radiator Flush 375ml

    ADRF375

    Ex Supplier

    Radiator Flush is a fast acting (7 Minute), alkaline cooling system cleaner designed to remove rust, scale and other deposits from automotive cooling systems that could block or foul circulation of coolant though the radiator or engine.

    APPLICATION

    Radiator Flush is recommended to clean out the cooling system of all types of passenger cars, 4WD’s, light & heavy duty commercial vehicles, motorcycles, agriculture, mining, construction and stationary engines.

    Radiator Flush is designed to be used prior to new coolant being added to the vehicles cooling system as this will ensure the cooling system is free from rust, scale or any other residue which could block or foul the cooling system and prevent the new coolant from functioning as intended. It will also neutralise any leftover coolant remaining in the engine eliminating compatibility issues if changing coolant types.

    Radiator Flush can also be used where any type of coolant has been present in the cooling system and is harmless to all metals, rubber, plastic and seals. We recommend refilling with a quality OEM approved Penrite anti-freeze anti-boil coolant such as –
    Red OEM Coolant (OEM Approved) Premix
    Red OEM Coolant (OEM Approved) Concentrate
    Green OEM Coolant (OEM Approved) Premix
    Green OEM Coolant (OEM Approved) Concentrate
    Blue OEM Coolant (OEM Approved) Premix
    Blue OEM Coolant (OEM Approved) Concentrate
    350,000KM Green Coolant Premix
    350,000KM Green Coolant Concentrate
    Universal Top Up Premix
    RCI100,000 KM Concentrate

    INSTRUCTIONS FOR USE

    Use 1 bottle for up to 15 Litres capacity

    • Drain Cooling System
    • Refill radiator with clean water
    • Add Radiator Flush to cooling system
    • Start Engine and turn on heater
    • Run engine for 10 – 15 minutes, this includes 7 minutes cleaning time
    • Turn off engine, allow to cool
    • Drain cooling system
    • Refill with appropriate Penrite Coolant

    NOTE – Please read Product Information sheet for more detailed Instructions

    Add to cart
  • Penrite Power Steering Stop Leak 375ml

    ADPSL375

    Ex Supplier

    Penrite Power Steering Stop Leak 375ml

    Power Steering Stop Leak has been specifically formulated to control leaks in the power steering system due to deteriorated or worn seals and gaskets.

    APPLICATION

    Power Steering Stop Leak has been designed for use in power steering systems that utilise Automatic Transmission Fluids (ATF‘s) as the power steering fluid. It is suitable for passenger cars, 4WD’s, and light commercial vehicles.

    Power Steering Stop Leak is suitable for use with vehicles that use the following Penrite power steering and automatic transmission fluids as well as most systems that use GM Dexron® type fluids that are utilised in power steering systems –

    Power Steering Stop Leak will not affect the performance of the Power Steering System

    FOR BEST RESULTS:

    1) Ensure the reservoir has 375ml capacity prior to filling.
    2) Add one bottle (375ml) for up to 1 litre of power steering fluid.

    NOTE: If leaks are still evident after use, replacement or repair of these parts may be required.

    Add to cart
  • Penrite Engine Flush 375ml

    ADEF375

    Ex Supplier

    Engine Flush is a solvent free, engine cleaning formulation that removes engine deposits, sludge and contaminants with the oil service drain. It contains added zinc for engine wear protection and its fast acting formulation works in 10 minutes. The solvent free formulation protects gaskets and seals from damage during the cleaning process.

    APPLICATION

    Engine Flush is designed for use in all engine types in passenger cars, 4WD’s, light & heavy duty commercial vehicles, motorcycles, farming, mining, agricultural, industrial equipment, marine and stationary engines.

    Engine Flush is safe to use in all petrol, LPG & diesel engines and is safe for catalytic converters, DPF‘s (Diesel Particulate Filters) and engine sensors. Its unique formulation of cleaning agents are designed to clean oil galleries, oil sludge and engine contaminants that effect lubrication of the engine. These contaminants are broken down by the Engine Flush and drained away with the oil service.

    Engine Flush is economical to use with an application rate is 50 ml Engine Flush per litre of oil. A 375ml bottle of Engine Flush will treat 7.5 litres of oil. Engine Flush is recommended for use at every oil service to maintain engine cleanliness.

    FOR BEST RESULTS
    • Start engine and run for 5 minutes
    • Application rate is 50ml per litre of oil. E.g. 375ml treats 7.5lts of oil
    • Add Engine Flush to engine oil prior to oil change through the oil fill point.
    • Re-start engine, let the engine run for 10 minutes
    • Allow engine to cool then drain engine oil & replace oil filter
    • Refill engine oil using the appropriate Penrite oil
    • Dispose of used oil & filter responsibly

    Note: Penrite recommend using Engine Flush at each oil change as preventative maintenance against sludge formation and to maximise the life of new engine oil.

    Add to cart
  • Penrite Engine Stop Leak 375ml

    ADESL375

    Ex Supplier

    Penrite Engine Flush

    Engine Stop Leak has been specifically formulated to control engine oil leaks due to deteriorated or worn seals and gaskets including the rear main seal. It provides a temporary seal to prevent loss of lubricating fluid and possible engine seizure or failure resulting in costly repairs.

    APPLICATION

    Engine Stop Leak is suitable for use in motorcycles, passenger cars, 4WD’s, light commercial vehicles and stationary engines and has been designed for use in petrol, dieselLPG and dual fuel engines.

    Engine Stop Leak is compatible with and will readily mix with MineralSemi Synthetic and Full Synthetic engine oils. It is safe to use with all metal types including Cast Iron, Aluminium & Magnesium.

    Engine Stop Leak gently revitalises worn and deteriorated gaskets and seals to prevent leaks and can reduce the risk of engine fire and excessive smoke from leaking oil onto extremely hot exhaust system manifolds, catalysts and pipes.

    NOTE: Engine Stop Leak is NOT RECOMMENDED for VVTI petrol engines or diesel engines with oil operated injector pumps.

    FOR BEST RESULTS
    • Add one bottle (375ml) to engine through oil filler point.
    • One bottle treats up to 6 litres of engine oil.
    • Use regularly at every oil change for maximum benefit
    Add to cart
  • Penrite Enviro+ DPF Cleaner 375ml

    ADDPFC375

    Ex Supplier

    Penrite Enviro+ DPF Cleaner

    Enviro+ DPF Cleaner is a Patented, liquid bimetallic platinum & cerium catalyst, diesel fuel additive specifically formulated to clean blocked DPF’s (Diesel Particulate Filters) as well as improve the operation and reduce maintenance of the DPF & emissions control systems in diesel engine applications. Its formulation is soluble and stable in traditional diesel & bio-diesel fuels. It cleans and assists in regeneration of …

    Penrite Enviro+ DPF Cleaner 375mlRead More

    Add to cart
  • Penrite Petrol Injector Cleaner 375ml

    ADPIC375

    Ex Supplier

    Penrite Engine Stop Leak 375ml (Copy)

    Petrol Injector Cleaner is a multi-purpose petrol fuel treatment that is designed to clean fuel injectors and carburettors in one tank of fuel whilst protecting fuel system components. Its unique formulation improves fuel economy by up to 2.4% on unleaded & E10 fuel and provides for engine power increases of up to 2.6%.

    APPLICATION

    Petrol Injector Cleaner is designed for use in all petrol engined passenger cars, 4WD’s, light & heavy duty commercial vehicles, motor cycles, marine and stationary engines.

    Petrol Injector Cleaner has special synthetic detergents that clean blocked fuel injectors and carburetor jets to restore lost power. It also provides for easier starting, smoother idling and better fuel economy.

    Petrol Injector Cleaner has a unique formulation that protects the fuel system against rust and corrosion especially in systems using ethanol fuel blends such as E10. It reduces intake valve deposits allowing optimum air fuel mixture and increases combustion efficiency resulting in improved power output.

    Petrol Injector Cleaner is suitable for unleaded petrol / LPG (Duel Fuel) and E10. It is not suitable for E85 or E100 fuels. It is safe for use with catalytic convertors and oxygen sensors.

    FOR BEST RESULTS
    • Add prior to filling the fuel tank.
    • If fuel injectors are excessively blocked or fouled, use two bottles (2 x 375ml) for up to 60 litres of fuel. This will provide rapid clean up and restoration of performance.
    • For regular fuel system maintenance use at the rate of one bottle (1 x 375ml) for up to 60 litres of fuel, every 2500 – 3000km.
    • For complete fuel system clean, use Penrite Petrol Total System Cleaner

    Please Note: If your vehicle is fitted with a Capless Fuel Filler system, we recommend using the vehicles emergency fuel filling funnel when adding this product to the fuel tank.

    Add to cart
  • Penrite Diesel Injector Cleaner 375ml

    ADDIC375

    Ex Supplier

    Penrite Diesel Injector Cleaner

    Diesel Injector Cleaner is a multi-purpose diesel fuel treatment that combines an advanced set of additives to clean and protect diesel fuel system components. It effectively cleans the whole fuel delivery system including injectors and fuel pumps extending the life of the fuel system components. It provides improved fuel economy, increases power, lowers emissions, makes starting easier, provides smoother idling and prevents against detonation damage.

    APPLICATION

    Diesel Injector Cleaner is designed for use in all diesel engines in passenger cars, 4WDs, light & heavy duty commercial vehicles, tractors, mining & construction equipment, farm equipment, marine and stationary engines. It can be used in all diesel injection systems including direct injection and common rail injection systems.

    Diesel Injector Cleaner has a powerful cleaning agent that cleans from the fuel tank right through to the injectors. It cleans up carboxylate salts that cause sticking in diesel injectors and removes deposits from the injector nozzles providing the optimum uniform spray pattern from the injector. This provides for maximum power and economy from the engine.

    Diesel Injector Cleaner conditions the diesel fuel improving its combustion quality which provides for power and economy increases. It can improve fuel economy by up to 2.5%.

    FOR BEST RESULTS:
    • Add prior to filling the fuel tank
    • If fuel injectors are excessively blocked or fouled, use one bottle (375ml) for up to 75 litres of diesel fuel. This will provide rapid clean up and restoration of performance
    • For regular fuel system maintenance use one bottle (375ml) for up to 200 litres of diesel fuel, every 2500km.
    • Over usage will not cause damage
    • For complete fuel system clean, use Penrite Diesel Total System Cleaner

    Please Note: If your vehicle is fitted with a Capless Fuel Filler system, we recommend using the vehicles emergency fuel filling funnel when adding this product to the fuel tank.

    For blocked DPF‘ we recommend Penrite Enviro+ DPF Cleaner

    Add to cart
  • Penrite Stop Leak 375ml

    ADRSL375

    Ex Supplier

    Penrite Stop Leak 375ml

    Radiator Stop Leak is a high quality water based sealant designed for temporarily fixing leaking cooling systems. Its fast acting formulation effectively seals radiators, heater cores, weeping head gaskets, hose joints and welsh plugs in automotive engines preventing major damage from loss of coolant and engine overheating.

    APPLICATION

    Radiator Stop Leak is suitable for all types of motorcycles, passenger cars, 4WDs, light and heavy duty commercial vehicles, construction, mining ,agricultural and stationary engines.

    Radiator Stop Leak is suitable for use with all types of materials including aluminium, cast ironcopperbrass, plastics & rubber hoses. One x 375 ml bottle will treat between 6 & 12 litres.

    Radiator Stop Leak will not block cooling system passages and is compatible with anti-freeze anti-boil solutions. If cooling system has lost fluid prior to Radiator Stop Leak being used , we recommend refilling with a quality Penrite Anti-Freeze Anti-Boil coolant such as

    • 8 Year Red Anti-Freeze Anti-Boil (OEM Approved)
    • 7 Year Green Anti-Freeze Anti-Boil (OEM Approved)
    • 7 Year Blue Anti-Freeze Anti-Boil (OEM Approved)
    • 350,000KM Green Anti-Freeze Anti-Boil
    • HD EC-01 Anti-Freeze Anti-Boil
    • PGXL Coolant
    • Universal Top Up Premix

    Instructions for Use:

    • Remove radiator cap
    • Shake bottle well prior to using.
    • Start engine and run, with heater on, for 2 minutes
    • Add contents directly to the radiator.
    • Refill radiator and refit radiator cap
    • Leave engine and heater on for 5 minutes.
    • Please dispose of bottle thoughtfully.

    Note:

    Penrite Radiator Stop Leak is designed as a temporary repair and does not replace the need for mechanical repairs. If leaks are still evident after use, replacement or repair of faulty parts may be required.

    Add to cart