New Zealand Online Car Parts

Phone or Text 027 7337410

Shopping Cart

close

No products in the cart.

Return to shop

New Zealand Online Car Parts

Shopping Cart

close

No products in the cart.

Return to shop
Phone or Text 027 7337410

Category: Consumables

Consumables

Showing all 153 results

  • 1751848

    Out of stock

    Replaces 6008

    CRC 5-56 Marine is a multi-purpose lubricant designed to prevent damage due to water and salt atmosphere in marine engines and boating equipment.

    CRC 5-56 Marine increases life span, decreases maintenance and assures improved performance of all marine inboard or outboard motors. It forms a thin film that protects metals from corrosion caused by humidity and salt air for extended periods and lubricates moving parts for smooth action. Superior penetrating power breaks through rust and corrosion, loosens rusted parts and keeps them free, displaces water from wet equipment and cleans away scale and dirt. It displaces moisture out of ignition systems to help start wet engines.

    It is safe for all metals and alloys and on most painted surfaces, coatings, plastics and rubbers.

    Features & Benefits

    • Multipurpose oil for the protection of marine engines and boating equipment
    • Lubricates for smooth action – Silences annoying squeaks and squeals
    • Corrosion protection
    • Penetrates quickly – Breaks away rust and corrosion, frees components bonded by dirt and scale
    • Eliminates the need for many disassembly operations
    • Protective film – Ongoing protection against water and salt atmosphere
    • Displaces moisture to help start wet engines
    • Preventative maintenance programs – To increase life expectancy of mechanical equipment
    • Safe on all metals and alloys, most painted surfaces, coatings, plastics and rubbers
    • Contains no silicone
    • Cleans grease and tar off painted surfaces
    • MPI Approved C14

    Uses

    • Numerous uses on every form of watercraft and boating equipment
    • Boat trailers, springs, shackles, domes and zips
    Contact Us
  • 1751842

    Out of stock

    CRC 556 Industrial is a high performance variant of CRC 5-56 fortified with PTFE for additional lubricating performance and is non-flammable making it safe for use in industrial applications. The presence of PTFE provides effectivelubrication and performs extremely well when frequent start/stop or alternating movements occur. Superior penetrating power breaks through rust and corrosion, loosens …

    CRC 5-56 Industrial Aerosol 420 mlRead More

    Contact Us
  • 1751840

    Out of stock

    The trusted 5-56 multi-purpose service spray in a low odour, no solvent formula. Ideal for areas where odour may be a concern, in confined spaces or where solvent use is regulated.

    CRC 5-56 Low Odour is the latest technological breakthrough in the 5-56 family. It combines the 4 strengths of 5-56 Multipurpose – it lubricates, penetrates, displaces moisture and protects from corrosion now with a low odour and no solvent formula. This makes it ideal for use in confined places or areas where odour sensitivity is a concern.

     

    Features & Benefits

     

    • Low odour
    • No solvent
    • Advanced lubrication for smooth action – Silences annoying squeaks and squeals
    • Stops and attacks rust – Protective film for ongoing protection against corrosion
    • Penetrates quickly – Breaks away rust and corrosion, frees components bonded by dirt and scale
    • Eliminates the need for many disassembly operations
    • Preventative maintenance programs – To increase life expectancy of mechanical equipment
    • Displaces moisture to help start wet engines
    • Cleans grease & tar off painted surfaces
    • Great for general bike and leisure activity maintenance
    • Safe for all metals and alloys, most painted surfaces, coatings, plastics and rubbers

    Uses

    • Sensitive areas: Schools, medical areas, shopping centers, shops, bedrooms, kitchens, laundry rooms
    • Work: Ideal for uses in work areas where solvent use is regulated
    • Confined areas: Under vehicles, in engine bays, bilges, inside boats and vehicles, offices, utility/server rooms
    • Electrical: Indoor; Plugs, switches, coils, leads, etc.
    • Cars: Ignition system, distributors, battery terminals, cables, starter motors, aerials, nuts and bolts, chrome, seat slides, door latches, spark plugs
    • Home: Door locks and hinges, sliding doors and windows, drills, catches, tools, scissors, zippers, prams and strollers, toys
    • Leisure: Fishing gear, bicycles, garden tools, roller skates, ski fittings, golf trundlers
    Contact Us
  • 1751839

    Out of stock

    CRC1751839 5-56 Marine is a multi-purpose lubricant designed to prevent damage due to water and salt atmosphere in marine engines and boating equipment.

    CRC 5-56 Marine increases life span, decreases maintenance and assures improved performance of all marine inboard or outboard motors. It forms a thin film that protects metals from corrosion caused by humidity and salt air for extended periods and lubricates moving parts for smooth action. Superior penetrating power breaks through rust and corrosion, loosens rusted parts and keeps them free, displaces water from wet equipment and cleans away scale and dirt. It displaces moisture out of ignition systems to help start wet engines.

    It is safe for all metals and alloys and on most painted surfaces, coatings, plastics and rubbers.

    Features & Benefits

    • Multipurpose oil for the protection of marine engines and boating equipment
    • Lubricates for smooth action – Silences annoying squeaks and squeals
    • Corrosion protection
    • Penetrates quickly – Breaks away rust and corrosion, frees components bonded by dirt and scale
    • Eliminates the need for many disassembly operations
    • Protective film – Ongoing protection against water and salt atmosphere
    • Displaces moisture to help start wet engines
    • Preventative maintenance programs – To increase life expectancy of mechanical equipment
    • Safe on all metals and alloys, most painted surfaces, coatings, plastics and rubbers
    • Contains no silicone
    • Cleans grease and tar off painted surfaces
    • MPI Approved C14

    Uses

    • Numerous uses on every form of watercraft and boating equipment
    • Boat trailers, springs, shackles, domes and zips
    Contact Us
  • 64097

    Ex Supplier

    Gulf Western Tire Shine 400gm

    Gives your tyres, louvres, bumpers, mud flaps and side mouldings a ‘new’ appearance and aids in the prevention of dirt forming on your tyres.

    Add to cart
  • 64096

    Ex Supplier

    Heavy duty water dispersant designed to displace moisture and lubricate, protect and start wet motors.

    Add to cart
  • 64095

    Ex Supplier

    Gulf Western Carb & Throttle Body Cleaner 400gm

    Rapidly removes carbon deposits, oil, sludge, gum and varnish from interior or carburetor and throttle body, shaft and plate.

    Add to cart
  • 50176

    Ex Supplier

    J-B WELD

    KwikWeld™ is a fast-setting version of The Original J-B Weld two-part epoxy cold weld system that provides strong, lasting repairs to metal and multiple other surface types. After mixing, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. KwikWeld™ has a 1:1 mixing ratio, sets in 6 minutes …

    J-B WELD KWIKWELD™ SYRINGE – 25 MLRead More

    Add to cart
  • 50165

    Ex Supplier

    J-B WELD

    J-B Weld™ Syringe is the original cold-weld™ two-part epoxy system that provides strong, lasting repairs to metal and multiple surfaces. Mixed at a ratio of 1:1, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. At room temperature, J-B Weld™ sets in 4-6 hours to a dark grey …

    J-B WELD™ SYRINGE – 25 MLRead More

    Add to cart
  • 50151

    Ex Supplier

    J-B WELD

    WoodWeld™ is a fast setting two-part epoxy system formulated for wood bonding and repairs. When fully cured it can be shaped, tapped, filed, sanded and drilled. It provides a lasting permanent bond that is stronger than wood! WoodWeld™ has a 1:1 mixing ratio, sets in 6 minutes and cures in 1-3 hours. Rated at a …

    J-B WELD WOODWELD™ SYRINGE – 25 MLRead More

    Add to cart
  • 50139

    Ex Supplier

    J-B WELD

    PlasticBonder™ is a quick-setting, two-part, urethane adhesive system that provides strong and lasting repairs and works on thermoset, carbon fiber composites, thermoplastics, coated metals, concrete & more. PlasticBonder™ has a 1:1 mixing ratio, sets in 15 minutes and can be sanded after 30 minutes. With a tensile strength of 3770 PSI, PlasticBonder™ sets black in …

    J-B WELD PLASTICBONDER™ SYRINGE – 25 MLRead More

    Add to cart
  • 50133

    Ex Supplier

    J-B WELD

    PlasticBonder™ is a quick-setting, two-part, urethane adhesive system that provides strong and lasting repairs and works on thermoset, carbon fiber composites, thermoplastics, coated metals, concrete & more. PlasticBonder™ has a 1:1 mixing ratio, sets in 15 minutes and can be sanded after 30 minutes. With a tensile strength of 3770 PSI, PlasticBonder™ sets to a …

    J-B WELD PLASTICBONDER™ SYRINGE – 25 MLRead More

    Add to cart
  • 50132

    Ex Supplier

    J-B WELD

    PlasticWeld™ is a specially formulated two-part adhesive and epoxy filler system that provides for strong, lasting repairs. PlasticWeld™ will bond a variety of surfaces, such as metal, composites, fiberglass and others. PlasticWeld™ sets in 5 minutes at room temperature and is fully cured in 1 hour. Using a 1:1 mixing ratio, PlasticWeld™ combines to a …

    J-B WELD PLASTICWELD™ SYRINGE – 25 MLRead More

    Add to cart
  • 50112

    Ex Supplier

    J-B WELD

    ClearWeld™ is a quick setting, multipurpose two part epoxy that provides a strong and lasting bond on most surfaces including tile, most plastics, ceramic, glass, wood and metal. ClearWeld™ is designed to cure with a clear, transparent bond when used at thicknesses of less than 15 mil. ClearWeld™ has a 1:1 mixing ratio, sets in …

    J-B WELD CLEARWELD™ SYRINGE 25MLRead More

    Add to cart
  • 50101

    Ex Supplier

    J-B WELD

    MinuteWeld™ is a special formulated, high-strength, two-part instant setting epoxy. MinuteWeld™ will set under most temperature conditions in one minute. MinuteWeld™ is designed to adhere to multiple surfaces and can be used on ceramic, tile, glass, stone, most plastics, wood and metal.

    Add to cart
  • 50099

    Ex Supplier

    J-B Weld® Static Mixers are easy-to-use attachments for any of J-B Weld® 25 ml syringes that allow for precise mixing of our two-component adhesives. Each mixer comes with 16 static elements to ensure complete mixing. The mixer tip can be cut to allow for larger and easier flow of material. The mixer opening should be …

    J-B WELD STATIC MIXERSRead More

    Add to cart
  • 35610

    Out of stock

    CRC FOOD GRADE SYNTHETIC GREASE 397G

    CRC Food Grade Synthetic Grease is a NLGI 2 translucent, non toxic lubricating grease that provides effective lubrication and protection of ball, roller, and plain bearings and sliding surfaces. It protects equipment against rust, oxidation and wear.

    CRC Food Grade Synthetic Grease is resistant to moisture, water and detergent wash down. Due to its high dropping point, it is particularly useful in high temperature applications. This product also performs extremely well in cold temperature applications as the base fluid exhibits a very low pour point.

    Temperature range -29°C to +176°C. NLGI 2. MPI C15. NZ AsureQuality assessment for food/beverage including dairy factories with incidental contact. NSF H1 Registered for incidental food contact.

    Features & Benefits

    • Wide temperature range -29°C to +176°C
    • Resistant to moisture, water and detergent wash-down
    • Protects equipment against rust, oxidation and wear.
    • Suitable for ball, roll and plain bearings and sliding surfaces
    • MPI C15 approved for incidental food contact
    • NZ AsureQuality assessment for food/beverage including dairy factories with incidental contact
    • NSF H1 Registered for incidental food contact
    • FOR USE BY – Dairy plants, Breweries, Canneries, Meat Processing Plants, Food Processing and Handling Equipment, Fish Processing Plants, Carton/Packaging Equipment, Pharmaceutical Manufacturers etc
    • FOR USE ON – Ball, roller and plain bearings, and sliding surfaces, gears, valves, pumps, conveyors, fittings, linkages, hoists, o-rings etc.
    Contact Us
  • 30463

    Out of stock

    CRC PUMP-UP SPRAYER   1Lt

    CRC Pump Spray Bottle is a durable, pump activated spray bottle produced specifically for the delivery of CRC products. Boasting a 1 Litre volume capacity, use this hand-held spray bottle to deliver a controlled, pump activated pressurised spray to larger, well-ventilated areas in a shorter time frame. Using the Pump Spray Bottle provides time efficiencies with reduced application time. The CRC Pump Spray Bottle is an easy to use, quality pump spray applicator that is both convenient and comfortable for the end user.

    Features and Benefits

    • Ideal for non-chlorinated ‘Brakleen Fast-Dry’
    • Pump action, pressurised spray bottle – For easy distribution of CRC products 
    • 1 litre container capacity
    • Quality “O” rings, sturdy container
    • Side pressure release wheel
    • Can be used at temperatures between +5°C and +35°C
    • Easy to use and comfortable to hold
    • Re-usable

    Uses

    • Quick coverage of larger open areas
    • Handy means of transfer when purchasing bulk CRC products
    • Use the CRC Pump Spray Bottle for a variety of CRC products such as; Brakleen Fast Dry 20L Jerry Can, CRC 5-56, Marine 66, 808 Silicone Spray, Re-Po Valet Pro Degreaser, Re-Po Valet Pro Tyre Cleaner, So Easy Tyre Shine, CRC Groomers Silicone, plus much more.
    • Not suitable for use with standard Brakleen (5091)
    Contact Us
  • 29006

    Ex Supplier

    JB WELD

    J-B Weld Threadlockers provide a reliable and superior lock and seal for threaded fasteners. Ideal on mechanical parts, body assemblies, and hundreds of other applications to prevent loosening of fasteners from shock and vibration. The perma-lock low viscosity green thread locker penetrates between part surfaces for a secure seal with no disassembly necessary. It can …

    J-B WELD PERMA-LOCK PENETRATING THREADLOCKER 6MLRead More

    Add to cart
  • 27106

    Ex Supplier

    JB WELD

    J-B Weld Threadlockers provide a reliable and superior lock and seal for threaded fasteners. Ideal on all mechanical parts, body assemblies, and hundreds of other applications to prevent loosening of fasteners from shock and vibration. J-B Weld Perma-lock High Strength Threadlocker is ideal for heavy-duty applications requiring resistance to severe shock and vibrations. Heating and …

    J-B WELD PERMA-LOCK RED THREADLOCKER 6MLRead More

    Add to cart
  • 24206

    Ex Supplier

    JB WELD

    J-B Weld Threadlockers provide a reliable and superior lock and seal for threaded fasteners. Ideal on all mechanical parts, body assemblies, and hundreds of other applications to prevent loosening of fasteners from shock and vibration. J-B Weld Perma-lock Medium Strength Threadlocker is ideal for fastener applications requiring easy disassembly with hand tools.

    Add to cart
  • 18418

    Out of stock

    CRC Rust Converter is a unique fast drying coating formulated for treatment of lightly rusted or correctly prepared metal surfaces. CRC Rust Converter neutralises rust and converts it to a tough black primer in one easy step. It binds to the surface and provides a waterproof barrier by sealing out moisture and other outside elements for effective long-lasting …

    CRC Rust Converter Bottle 1 litreRead More

    Contact Us
  • 14610

    Out of stock

    CRC Rust Converter is a unique fast drying coating formulated for treatment of lightly rusted or correctly prepared metal surfaces. CRC Rust Converter neutralises rust and converts it to a tough black primer in one easy step. It binds to the surface and provides a waterproof barrier by sealing out moisture and other outside elements for effective long-lasting …

    CRC Rust Converter Aerosol 425 gRead More

    Contact Us
  • 14503

    Out of stock

    CRC Leak Detector is formulated for the quick and easy site detection of gas and air leaks. The water-based formula contains no oils, silicones or harmful solvents. CRC Leak Detector quickly and reliably locates gas leaks and pressure losses in pipes and pressurised systems by forming highly visible bubbles when applied over any leak. Features …

    CRC Leak Detector Aerosol 510 gRead More

    Contact Us
  • 14070

    Out of stock

    Minute Mend is a versatile epoxy putty packaged in a convenient one piece stick for immediate, permanent repairs. It can be used to reshape, rebuild or permanently repair a variety of surfaces and applications. It is hand-kneadable and mixes in just one minute. Minute Mend is ideal to permanently repair scratches, gouges and holes, to …

    CRC Minute Mend Tube 114 gRead More

    Contact Us
  • 9308

    Out of stock

    CRC Mag Monster is formulated with powerful iron emulsifiers to penetrate brake dust and quickly clean your wheels. By attacking the brake dust underneath road grime, it allows for a complete clean, leaving your wheels shining, with minimal effort. You will be able to see the product begin working immediately, turning purple as it gently cleans.

    CRC Mag Monster is pH neutral, acid free, and safe on all painted, chromed, alloy, and plastic dipped wheels. CRC Mag Monster has been formulated to have a pleasant scent, eliminating the sulphur odour commonly associated with brake dust removers.

    Note: Optimised for iron brake dust removal. Not suitable for white wheels, unsealed or porous surfaces.

    Features and Benefits:

    • Easily removes brake dust and road grime
    • pH neutral
    • Makes light work of cleaning wheels
    • Pleasent scent – No sulphur smell
    • Ideal for performance and race vehicles
    Contact Us
  • 9302

    Out of stock

    CRC Mag Wheel Cleaner is a powerful non-acid formula that is suitable for cleaning most wheel types including original factory applied clear coats. Its unique, fast acting foaming action penetrates, dissolves and lifts off dirt, grease, tar, road grime & brake dust. Cleaning is easy and wheels are left spotless, with no residue or any need to hand dry.

    CRC Mag Wheel Cleaner safely restores all clear coated alloy or magnesium wheels to their original condition. It contains an additive to brighten the metal and an anti-static surfactant to repel dust & dirt, ensuring a long lasting shine.

    CRC Mag Wheel Cleaner will not harm paint, rubber, chrome, gun metal, polished or unpolished aluminium or plastics. Do not use on wheels finished with a metallic coating such as HyperCHROME or others. If unsure, contact the manufacturer of the wheels.

    CRC Mag Wheel Cleaner is also suitable for general automotive cleaning/degreasing where a high grease cutting ability is required.

    Features & Benefits

    • Unique foaming action – Remains in place to soak into the dirt
    • Powerful non-acid formula – Will not damage metal surfaces or driveways
    • Contains detergent & solvent – Penetrates, dissolves and lifts off dirt, grease, tar, road grime & brake dust
    • Cleans & brightens metal
    • Anti-static surfactant – Repels dust and dirt
    • Water based – Rinses away with water
    • No residue – Leaves wheels spotless, no need to hand dry.
    • Repels dust & dirt – Ensures a longer lasting shine
    • For most wheel types – Including original factory applied clear coats
    • Safely restores all clear coated alloy or magnesium wheels to their original condition
    • Made in NZ

    Uses

    • Cars, 4WDs & trucks: Wheel recesses, wheel arches, grills and under sills
    • Motorbikes: Wheel spokes, cooling fans, suspension and brake units
    • BMX, Mountain Bikes, Quad Bikes, Lawnmowers
    • Note: Do not use on wheels finished with a metallic coating such as HyperCHROME or others. If unsure, contact the manufacture of the wheels.
    Contact Us
  • 9240

    Out of stock

    CRC Plastic & Rubber Doctor instantly restores, protects and maintains original colour and lustre of exterior trim. Easy application provides a deep, rich shine, renewing the appearance of dull, faded, discoloured plastic and rubber trim. For use on all colours and textures of plastic, vinyl and rubber.

    The long lasting protection barrier of CRC Plastic & Rubber Doctor lasts up to 4 months. It withstands repeated car washing, rain, environmental contaminants and helps prevent fading caused by UV rays and sun exposure.

    CRC Plastic & Rubber Doctor will also cover white residue left behind by traditional waxes and polishes. It will not streak or run onto your cars finish in rain or car washes.

    Use safely on all porous and non-porous plastic surfaces such as plastic bumpers, trim, rubber, gaskets, decorative mouldings, air vents, window trim & wiper arms, mirror housing etc.

    Features & Benefits

    • Made in NZ
    • Quick and easy
    • Instantly restores original colour to faded plastic & rubber
    • Long lasting weather & UV protection – Lasts up to 4 months
    • For use on all colours & textures of plastic, vinyl and rubber.
    • Can be used safely on all porous and non-porous plastic surfaces
    • Withstands repeated car washing, rain, environmental contaminants and helps prevent fading caused by UV rays and sun exposure.
    • Covers white residue left behind by traditional waxes and polishes
    • Will not streak or run in rain or car washes

    Uses

    • Can be used on all unpainted smooth & textured plastic, vinyl and rubber trim including:
    • Bumpers
    • Rubber window seals
    • Door and window trim
    • Door handles
    • Windowshield/Wiper arms
    • Mud/splash guards
    • Tonneau Covers
    • Side view mirror housing
    • Rubber gaskets
    • Decorative moldings
    • Air vents

     

    Contact Us
  • 9230

    Out of stock

    CRC Headlight Doctor restores clarity to dull and yellowing headlight lenses. It quickly and easily cleans, shines and protects all vehicle lenses, improving driving visibility. Headlight Doctor restores cloudy and dull headlights, removes surface oxidation, discolouration, stains, light scratches, contamination and hazing. Headlight Doctor provides a water resistant protective coating, delaying future oxidation and discolouration. Headlight Doctor is suitable for cleaning and restoring most plastic surfaces including – headlight and tail light lenses, bug shields, auto and marine windshields, instrument clusters, helmet visors, safety goggles, plastic convertible windows.

    NOTE: Suitability in each case should be determined by first testing on an inconspicuous area. Cracked, micro-cracked, severely pitted, water fogged from the inside, or severely weathered lenses may not return to the original condition.

    Features & Benefits

    • Convenient – Quick & Easy
    • Safety – Improves driving visibility
    • Cleans, shines and protects
    • Restores clarity to headlights and most plastic surfaces
    • Removes surface oxidation, discolouration, stains, light scratches, contamination and hazing
    • Delays future oxidation & discolouration – Polymers provide water resistant, long lasting protection
    • Made in NZ

    Uses

    • Headlight lenses
    • Tail light lenses
    • Bug shields
    • Instrument clusters
    • Auto and marine windshields
    • Helmet visors
    • Safety goggles
    • Plastic convertible windows
    • Removes surface oxidation, discolouration, stains, light scratches, contamination and hazing
    Contact Us
  • 9225

    Out of stock

    CRC Glass Doctor restores glass by removing difficult stains, hard water spots, haze, mineral deposits and soap scum from most glass surfaces. Glass Doctor polishes away road grime, bugs, salt spray, tree sap, paint overspray, lime scale and acid rain deposits.

    CRC Glass Doctor is ideal to use on most glass windows on vehicles, boats and buildings, glass shower doors, mirrors, glass balustrades, gas and wood fireplace glass, aquarium and terrarium glass.

    Note: For use on glass surfaces only

    Features & Benefits

    • Restores glass
    • Removes difficult stains, hard water spots, haze, mineral deposits and soap scum from all glass surfaces
    • Polishes away road grime, bugs, salt spray, tree sap, paint overspray, lime scale, acid rain deposits, rust marks, exhaust stains and other organic stains.
    • Made in NZ

    Uses

    • Ideal for use on glass windows on vehicles, boats and buildings, glass shower doors, mirrors, glass balustrades, gas and wood fireplace glass, aquarium and terrarium glass etc
    • Automotive and Marine ​- Glass windows, mirrors etc
    • Around the home – Glass windows, shower glass, balustrades, glass cookware, gas & wood fireplace glass, glass pool fencing, aquarium and terrarium glass etc

     

    Note of caution:

    • Modern windscreen glass is softer than the safety glass used around the rest of the vehicle. Glass doctor can produce micro-scratching resulting in the appearance of a cloudy patch or haze in some cases. The product is best not used on windscreens.
    • Wing mirrors on some modern vehicles have a tinted surface film which can be removed with glass doctor. Should not be used on tinted mirrors.
    Contact Us
  • 9220

    Out of stock

    CRC9220 Paint Doctor is the perfect solution to touch up isolated paint scratches, scuffs, road film and blemishes caused by supermarket trollies, trees, keys, road works etc.

    CRC Paint Doctor incorporates fine polishing compounds, premium Carnauba wax and superior fluids to remove the imperfections and safely restore a deep rich gloss to the treated area. It can also rejuvenate dull or faded paintwork.

    CRC Paint Doctor is safe on clear coat finishes, easy to apply and won’t dry out.

    Features & Benefits
    Safe on all clear coat finishes
    Ideal for all auto paint surfaces
    Quickly & easily removes fine scratches, swirls, stains and blemishes.
    Rejuvenates dull or faded paint
    Restores a deep rich gloss to the treated area
    Easy to apply
    Convenient soft pack
    Contains Premium Carnauba Wax.
    Restores headlights
    Uses
    Safe to use on all auto paint surfaces including clear coats, to remove scuff marks, paint defects, oxidised paint, road film and scratches which have not gone through to the undercoat.

    Contact Us
  • 9205

    Out of stock

    CRC9205 Quick and Easy Shine is a quick and easy way to shine in between washing and waxing. The spray on, wipe off application is a convenient way to maintain and enhance all vehicle colours in seconds. Blacks blacker, colours brighter.

    CRC Quick and Easy Shine safely removes light dust, finger prints, fills in minor swirl marks leaving an ultimate shine. The Montan wax provides a deep shine and is very resistant to oxidation. It is safe to use on all clear coats and glossy paint finishes (not for matt finishes).

    For a longer lasting shine, use CRC Polish & Wax or Repo Cream Polish

    Features & Benefits

    • Ultimate paintwork shine in seconds
    • Easy no buffing or rubbing
    • Made in NZ
    • Use in between washes for quick detailing.
    • Spray On, Wipe Off
    • Removes light dust, finger prints and minor swirls
    • Enhances car colours – Blacks blacker, colours brighter
    • With Montan wax – Provides a deep shine and is very resistant to oxidation
    • Safe on all clear coats and glossy paints (not for matt finishes)

    Uses

    • Safe to use on all clear coats and glossy paint finishes (not for matt finishes).
    Contact Us
  • 9051H

    Out of stock

    CRC VortX™ Wash & Wax is a specially designed ‘two in one’ formula which combines a high quality cleaner with protective Carnauba Wax to leave your vehicle in the best possible condition – all with E-Z Hose convenience. No Bucket. No Mess

    CRC VortX™ Wash & Wax high quality foaming cleaner is formulated to be gentle and safe on all painted finishes yet strong enough to remove the toughest dirt and road grime. The Carnauba Wax coats and protects your vehicle from damaging environmental conditions, while creating a streak free, ultra shine finish.

    CRC VortX™ Wash & Wax is safe to use on all paint, and is Biodegradable & Phosphate free.

    Features and Benefits

    • E-Z Hose applicator – Saves you time and energy with Plug & Spray convenience
    • Removes tough dirt, road grime, bugs and bird residue
    • Waxes while you wash
    • Protects against water spots
    • Hydrophobic polymer technology
    • Cleans, shines, & protects with Carnauba Wax
    • Safe to use on all paint, no dulling or stripping of paintwork
    • Biodegradable & Phosphate free  

    Uses

    • Perfect for all types of motor vehicles – cars, trucks, motorbikes, boats, motorhomes etc.
    • Safe to use on all paint finishes including clear coats
    Contact Us
  • 9011

    Out of stock

    CRC Wash & Wax is a specially designed ‘two in one’ formula which combines a high quality cleaner with a protective wax to leave your car in the best possible condition.  The high quality foaming cleaner is formulated to be gentle on painted finishes yet strong enough to remove the toughest dirt and road grime. The wax concentrate coats and protects your car from damaging environmental conditions while creating a streak free, ultra shine finish.

    Used regularly, CRC Wash & Wax make’s wax polishes last longer by adding more wax as you wash. For best results wash once a week.

    Biodegradable – safer for the environment. Contains fully biodegradable surfactants within the requirements of the N.H. and MRC (conforms to AS 1792).

    CRC has a full range of products to clean, shine and indulge your car. From wash & waxes to mag & tyre cleaners. The CRC range has every make and model covered.

    Features & Benefits

    • Two in one formula – Waxes while you wash
    • Cleans, shines and protects
    • Gentle on all painted surfaces yet tough on dirt and road grime
    • Quick and Easy
    • High quality foaming action
    • Streak free, ultra shine.
    • Phosphate free, biodegradable
    • Made in NZ

    Uses

    • Perfect for all types of motor vehicles – cars, trucks, motorbikes, caravans etc.
    • Safe to use on all paint finishes.
    Contact Us
  • 8629

    Out of stock

    CRC Red RTV Gasket 340 is formulated for heavy duty, high temperature applications with an intermittent service temperature of up to 340ºC.

    CRC Red RTV Gasket 340 is a self-forming room temperature vulcanising Silicone that replaces almost any cut gasket, felt, cork, paper, asbestos and rubber gaskets. No gasket sealers are required – the pure silicone rubber forms to any size and shape quickly.

    CRC Red RTV Gasket 340 resists migrating caused by thermal cycles, cracking, shrinking and vibration. It is ideal for high temperature, high pressure applications, it will remain flexible and durable.

    CRC Red RTV Gasket 340 is NOT recommended for use on copper and brass. Do not use as a head gasket, not suitable for stove pipes or in fireplaces.

    Features & Benefits

    • Intermittent service temperature of up to 340°C
    • Makes any size or shape of gasket in minutes
    • Ideal for high temperature high pressure applications
    • Replaces most gaskets
    • Remains flexible and durable
    • Easy to apply

    Uses

    • General machinery and automotive gasketing
    • Valve rocker cover
    • Timing chain cover
    • Thermostat housing
    • Transmission pan
    • Side cover plate
    • Water outlet/inlet
    • Water pump cover gasket
    • Intake manifold
    • Oil pan corner seals
    • Differential cover
    Contact Us
  • 8300

    Out of stock

    ADOS All Purpose Silicone is a single component, fast curing, room temperature vulcanising silicone. The mould and mildew resistant properties make the sealant ideal for bathroom and other plumbing applications. It is translucent in colour.

    It can be used on most building materials and on many damp surfaces, such as timber, cement, many plastics, roofs and guttering, window frames and glazing, masonry, ceramics etc.

    Available at Mitre 10 stores

    Features & Benefits

    • A general purpose, neutral cure RTV silicone
    • Mould & mildew resistant
    • Widely used by plumbers, roofing contractors, builders, general industry and the home handyman
    • Translucent in colour

    Uses

    • Excellent adhesion to steel, masonry, glass, aluminium and ceramics
    • Used where high humidity and temperatures may be encountered
    • Kitchen and bathroom fixtures
    • Sealing showers and tubs
    • Curtainwall sealing
    • Draught proofing
    • Weather sealing
    • Plastic to metal in glazing applications
    • Concrete
    • Metal to concrete in perimeter sealing
    • Most plastered and painted surfaces
    • Galvanized or zinc coated steel
    • Butt or lap shear joints

    Product Selection Guide

    Contact Us
  • 8297

    Ex Supplier

    J-B WELD

    HighHeat™ is a hand mixable epoxy putty stick specifically formulated to bond and repair materials that will be exposed to high temperatures in automotive and industrial maintenance applications. It cures to a tough, hard bond with little to no shrinkage. This industrial-strength product outperforms conventional epoxy putties at high temperatures and sets in 1 hour …

    J-B WELD HIGHHEAT™ EPOXY PUTTY – 2 OZRead More

    Add to cart
  • 8281

    Ex Supplier

    JB WELD

    J-B Weld™ is The Original Cold Weld two-part epoxy system that provides strong, lasting repairs to metal and multiple surfaces. Mixed at a ratio of 1:1, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. At room temperature, J-B Weld™ sets in 4-6 hours to a dark grey …

    J-B WELD™ PROFESSIONAL SIZE 10 OZRead More

    Add to cart
  • 8277

    Ex Supplier

    J-B WELD

    WaterWeld™ will plug or seal leaks and patch holes and cracks in almost anything. Ideal for repairing plumbing, fuel tanks, tub and shower, drains, pool and spa, boats and potable water tanks; setup occurs even under water. After curing, it can be drilled, tapped, filed, sanded and painted. WaterWeld™ has a set time of 15-25 …

    J-B WELD WATERWELD™ EPOXY PUTTY – 2 OZRead More

    Add to cart
  • 8276

    Ex Supplier

    J-B WELD™ PROFESSIONAL SIZE 10 OZ (Copy)

    KwikWeld™ is a fast setting version of The Original J-B Weld two-part epoxy cold weld system that provides strong, lasting repairs to metal and multiple other surface types. After mixing, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. KwikWeld™ has a 1:1 mixing ratio, sets in 6 …

    J-B WELD KWIKWELD™ TWIN TUBE – 2 OZRead More

    Add to cart
  • 8272

    Ex Supplier

    J-B WELD

    MarineWeld™ is a specially formulated two-part epoxy cold weld system that provides for strong, lasting repairs for bonding different or similar surfaces, such as aluminum, metal, composites, fiberglass and others. MarineWeld™ sets in 4-6 hours at room temperature and is fully cured to a dark grey color in 15-24 hours. Once cured, it can be …

    J-B WELD MARINEWELD™ TWIN TUBE – 2 OZRead More

    Add to cart
  • 8265S

    Ex Supplier

    J-B WELD™ TWIN TUBE – 2 OZ

    J-B Weld™ is The Original Cold Weld two-part epoxy system that provides strong, lasting repairs to metal and multiple surfaces. Mixed at a ratio of 1:1, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. At room temperature, J-B Weld™ sets in 4-6 hours to a dark grey …

    J-B WELD™ TWIN TUBE – 2 OZRead More

    Add to cart
  • 8259S

    Ex Supplier

    J-B WELD

    SteelStik™ is a hand-mixable, steel-reinforced, non-rusting epoxy putty that quickly repairs or rebuilds anything made of metal. After mixing, it forms an industrial-strength polymer compound that can be molded into shapes or used to build up, patch and repair steel components. SteelStik™ sets in 3-5 minutes and after 60 minutes, can be drilled, tapped, machined, …

    J-B WELD STEELSTIK™ EPOXY PUTTY – 2 OZRead More

    Contact Us
  • 8258

    Ex Supplier

    J-B WELD

    KwikWood™ is a hand-mixable epoxy putty, formulated to repair and rebuild wood. After mixing, it cures to the same density as wood and becomes an integral part of the repair. For use on exterior or interior applications, it contains no solvents, will not rot, shrink, crack or pull away. KwikWood™ has a 15-25 minute work …

    J-B WELD KWIKWOOD™ EPOXY PUTTY – 2 OZRead More

    Contact Us
  • 8257

    Ex Supplier

    J-B WELD

    KwikWood™ is a hand-mixable epoxy putty, formulated to repair and rebuild wood. After mixing, it cures to the same density as wood and becomes an integral part of the repair. For use on exterior or interior applications, it contains no solvents, will not rot, shrink, crack or pull away. KwikWood™ has a 15-25 minute work …

    J-B WELD KWIKWOOD™ EPOXY PUTTY – 1 OZRead More

    Contact Us
  • 8251

    Ex Supplier

    J-B WELD

    WoodWeld™ is a fast setting two-part epoxy system formulated for wood bonding and repairs. When fully cured it can be shaped, tapped, filed, sanded and drilled. It provides a lasting permanent bond that is stronger than the wood! WoodWeld™ has a 1:1 mixing ratio, sets in 6 minutes and cures in 1-3 hours. Rated at …

    J-B WELD WOODWELD™ TWIN TUBE – 1.5 OZRead More

    Add to cart
  • 8250

    Out of stock

    J-B WELD

    WoodWeld™ is a fast setting two-part epoxy system formulated for wood bonding and repairs. When fully cured it can be shaped, tapped, filed, sanded and drilled. It provides a lasting permanent bond that is stronger than the wood! WoodWeld™ has a 1:1 mixing ratio, sets in 6 minutes and cures in 1-3 hours. Rated at …

    J-B WELD WOODWELD™ PROFESSIONAL SIZE 7.4 OZRead More

    Contact Us
  • 8237

    Ex Supplier

    J-B WELD

    PlasticWeld™ is a hand-mixable, fast-setting epoxy putty that forms a durable bond to most major plastic types. *After mixing, it forms a polymer compound that can be molded or used to build up and repair just about anything made from plastic. When cured, it can be sawed, drilled, carved, sanded and painted. PlasticWeld™ has a …

    J-B WELD PLASTICWELD™ EPOXY PUTTY – 2 OZRead More

    Add to cart
  • 8217

    Ex Supplier

    J-B WELD

    TankWeld™ is a hand-mixable, steel-reinforced, non-rusting epoxy putty that quickly repairs or rebuilds anything made of metal. After mixing, it forms an industrial-strength polymer compound that can be molded into shapes or used to build up, patch and repair steel components. TankWeld™ sets in 5 minutes and after 60 minutes, can be drilled, tapped, machined, …

    J-B WELD TANKWELD™ EPOXY PUTTY – 1 OZRead More

    Add to cart
  • 8180

    Ex Supplier

    ADOS UHS is an ultra high strength contact adhesive which gives an immediate and permanent bond on a wide variety of surfaces. It is formulated to give low soak, cure fast, dry clear and be non-staining.

    It has high heat resistance and is suitable on porous and non-porous surfaces making it ideal for a wide variety of applications, where permanent, high strength bonds are essential. ADOS UHS uses a unique resin system making it resistant to breakdown from plasticiser migration.

    ADOS UHS aerosol is fitted with a variable nozzle, which allows controlled, accurate spraying, reducing product wastage and limiting over-spray.

    Features & Benefits

    • Ultra High Strength – Instant Permanent Contact Bond
    • High Heat Resistance – Up to 75°C
    • Plasticiser Safe – Resistant to breakdown from plasticiser migration
    • Easy to Use – No clamping required
    • Variable Nozzle – Allows controlled, accurate spraying and a variable spray width

    Uses

    • Bonding porous & non-porous surfaces
    • Wood, metal, concrete, flooring (cork tiles, carpet, linoleum, hardwood, laminate),
      some plastics, particle board, foam
    • It is not suitable for use on polystyrene
    Add to cart
  • 8017

    Out of stock

    ADOS Multi Purpose Spray Adhesive bonds most materials quickly and easily, giving a long lasting bond. It is formulated to give a fast tack off, low soak spray and dries clear.

    ADOS Multi Purpose Spray Adhesive is a pressure sensitive one-way adhesive that remains repositionable for 1-2 minutes eliminating costly errors with expensive materials. Once positioned, the adhesive will bond within 10-20 minutes. Full cure will take 24 hours.

    Features & Benefits

    • Reliable – High strength
    • Convenient – Rapid cure, fast tack
    • User friendly – Non staining / low mist, Aerosol = no clean up
    • Easy to Use – Repositionable, Clear drying
    • Cost effective – Low soak
    • Low odour – Safe for indoor use

    Uses

    • Bonding wood, paper, metal, most plastics, fibreglass, leather, carpet, PVC foam, cardboard, cloth, fabrics, foils, cork, some rubbers, felt, labeling, sail cloths, photographs

    Product Selection Guide

    Contact Us
  • 8015

    Out of stock

    ADOS Multi Purpose Spray Adhesive bonds most materials quickly and easily, giving a long lasting bond. It is formulated to give a fast tack off, low soak spray and dries clear.

    ADOS Multi Purpose Spray Adhesive is a pressure sensitive one-way adhesive that remains repositionable for 1-2 minutes eliminating costly errors with expensive materials. Once positioned, the adhesive will bond within 10-20 minutes. Full cure will take 24 hours.

    Features & Benefits

    • Reliable – High strength
    • Convenient – Rapid cure, fast tack
    • User friendly – Non staining / low mist, Aerosol = no clean up
    • Easy to Use – Repositionable, Clear drying
    • Cost effective – Low soak
    • Low odour – Safe for indoor use

    Uses

    • Bonding wood, paper, metal, most plastics, fibreglass, leather, carpet, PVC foam, cardboard, cloth, fabrics, foils, cork, some rubbers, felt, labeling, sail cloths, photographs

    Product Selection Guide

    Contact Us
  • 7236

    Out of stock

    CRC Brush-On Underbody Seal gives protection against corrosion and stone chips while insulating against drumming and road noise.

    The tough coating is non drip and easy to apply with a brush.

    CRC has developed the original Mendent Brush On Underbody Seal, now part of the trusted CRC family of products.

    Uses

    • Under guards, door sills, chassis and fuel tanks
    • To reduce drumming and road noise, Underbody Seal should also be applied to the inside door panels
    • Do not apply to internal floor structures
    Contact Us
  • 7234

    Out of stock

    CRC Brush-On Underbody Seal gives protection against corrosion and stone chips while insulating against drumming and road noise.

    The tough coating is non drip and easy to apply with a brush.

    CRC has developed the original Mendent Brush On Underbody Seal, now part of the trusted CRC family of products.

    Uses

    • Under guards, door sills, chassis and fuel tanks
    • To reduce drumming and road noise, Underbody Seal should also be applied to the inside door panels
    • Do not apply to internal floor structures
    Contact Us
  • 7111

    Out of stock

    CRC Cyclone Body Panel and Dent Filler is a high grade polyester based cream filler suitable for many applications. It is ideal for repairing damage to steel, aluminium and fiberglass panels in automobiles, trucks, boats and even planes. It’s so versatile it is even suitable for repairing most timbers and leveling concrete.

    CRC Cyclone Fillers unique formula upon hardening offers a tack free finish that will not clog sandpaper. This makes sanding easier and quicker. In normal conditions when mixed in right proportions, CRC Cyclone Auto Filler will gel in 8-10 minutes and full harden ready to finish within 10-20 minutes depending on the ambient temperature.

    Features & Benefits

    • Excellent adhesion
    • Tack free finish
    • Easy sand formula – Will not clog sandpaper, making sanding easier and quicker
    • Suitable to repair damage to steel, aluminium, fibreglass panels on automobiles, trucks, boats and even planes
    • Suitable for repairing most timbers and leveling concrete.
    • In normal conditions when mixed correctly CRC Cyclone Body Filler will gel in 8-10 minutes and fully harden within 10-20 minutes

    Uses

    • Suitable for repairing damage to steel, aluminium and fibreglass panels in automobiles, trucks, boats and even planes
    • Suitable for repairing most timbers and levelling concrete
    Contact Us
  • 6028

    Out of stock

    CRC Tackleguard is specifically formulated to keep fishing tackle safe from corrosion. It cleans, lubricates, drives out moisture, prevents corrosion and protects tackle even through periods of storage.

    A light spray once a day during fishing is recommended. At the end of the season or earlier if heavy use or continuous exposure to the elements occurs reels should be taken apart, cleaned and lubricated then liberally sprayed with CRC Tackleguard.

    Features & Benefits

    • Fights corrosion – Protects all metal reel parts, terminal tackle, rod guides and knives from corrosion
    • Lubricates – Protects and lubricates all types of fresh and salt water reels
    • Braid, nylon and mono fishing line safe formula – Will not damage monofilament, braids, Kevlar, polypropylene, EVA grips, seals, etc. Use with confidence.
    • Displaces water – Penetrates and drives out moisture leaving a long-lasting film that will not dry out
    • Penetration levels designed to loosen corroded parts yet not penetrate into gears
    • Rust free can – Will not discolour surfaces or stain hands
    • Small can size – Fits tackle boxes and small storage areas
    • Clean fresh smell – Will help overcome stale fish smell
    • Concentrated spray pattern – For economical delivery
    • Designed in New Zealand for New Zealand conditions

    Uses

    • Fishing equipment
    Contact Us
  • 5503

    Out of stock

    CRC Penetr8 Freeze Off is an industrial strength, low viscosity, rust penetrating lubricant with a unique freezing effect designed to loosen and free seized, bound or frozen fasteners quicker and more effectively than conventional penetrants. It immediately drops the temperature of the treated area to crack the surface allowing the high purity penetrant to reach deeper and work faster.

    CRC Penetr8 Freeze Off quickly permeates rust, scale, gum, grease and corrosion with a low surface tension formula. It creeps into cracks, seams, threads and joints with greater efficiency and leaves a thin non-drying colourless film with outstanding lubrication and corrosion inhibiting properties.

    CRC Penetr8 Freeze Off eases the disassembly of plant machinery, tools and equipment for routine maintenance and emergency repairs. This rust penetrating lubricant outperforms the competition in penetration, speed and corrosion resistance as verified by independent tests.

    Features & Benefits

    • Extreme Penetrating Action – Specially formulated rust penetrating lubricant, dissolving varnishes and gums
    • Freezing Effect – Penetrates deeper and works faster
    • Improves Performance and Operating Efficiency – Loosens rusted and corroded nuts, bolts, couplings, fittings, hinges and frozen components
    • Outperforms the Competition – As verified by independent tests
    • Corrosion Inhibiting – Lubricating residue prevents further corrosion
    • Safe on metals and most plastics, rubbers and paints 
    • Contains No Known Ozone Depleting Chemicals

    Uses

    • Ideal for use in smaller components.
    • Recommended for use on nuts and bolts, pins, screws, bushings, clips, hinges, snaps, lugs, caps, locks, washers and sliding mechanisms.
    • Can also be used for cleaning concrete tools and rusted surfaces of moulds, dies and heavy tools and for softening or removing carbon deposits.
    • Ideal for use in plumbing, garages, piping, construction, machine shops, heavy industry, mining.
    Contact Us
  • 5327

    Out of stock

    CRC Diesel Injector Cleaner is specifically designed to clean injectors in modern diesel engines and keep them clean. It incorporates advanced surface active agents, detergents, moisture dispersants, corrosion inhibitors and cleaning agents providing improved fuel economy and reduced emission output. It controls deposits and clears injector nozzles preventing injector fouling and restoring the essential spray volume necessary for the smooth operation of the engine.

    CRC Diesel Injector Cleaner protects fuel pumps and is suitable for all types of diesel motors including high pressure common rail types. It is suitable for both direct and indirect injection systems. Add to fuel when topping up every 5,000km to maximise diesel engine efficiency.

    Features & Benefits

    • Cleans injectors and keeps them clean
    • Restores the essential spray volume necessary for the smooth operation of the engine
    • Prevents power loss and injector fouling
    • Eliminates excessive smoking
    • Approved for all types of diesel motors including high pressure common rail types
    • Suitable for both direct and indirect injection systems

    Uses

    • Suitable for all types of diesel motors including high pressure common rail types
    • Suitable for both direct and indirect injection systems
    Contact Us
  • 5121

    Out of stock

    CRC Proseal #1 Underbody Rubberised Coating is a professional grade, bituminous based formulation that forms a durable, waterproof protective coating. The long-lasting, flexible layer protects against rust, corrosion and abrasion. It insulates against road noise and seals out fumes, dust and moisture.

    CRC Proseal #1 Underbody Rubberised Coating has excellent application, adhesion and stretch characteristics and is fast drying with no dripping, running or sagging. It has excellent adhesion to both painted and unpainted surfaces.

    CRC Proseal #1 Underbody Rubberised Coating is ideal for use in wheel arches, quarter panels, fenders and under carriages.

    Features & Benefits

    • Protects against rust, corrosion, moisture, heat and cold
    • High resistance to abrasion
    • Excellent sound reduction
    • Fast Drying
    • Excellent application, adhesion and stretch characteristics
    • Paintable
    • Convenient ready-to-use aerosol
    • Water resistant
    • Bituminous based formulation
    • Provides superior adhesion to both painted and unpainted surfaces
    • Does not drip, run or sag

    Uses

    • To protect car underbody surfaces, wheel arches, quarter panels and fenders against rust, corrosion and abrasion.
    • To insulate against road and muffler noise
    • To seal out exhaust fumes, dust and moisture
    Contact Us
  • 5115

    Out of stock

    CRC Strip-Off Paint Stripper is a fast aerosol stripper which removes paint and varnish from most types of surfaces including paint brushes.

    It can also be used for removing fat and loose surface rust from BBQ plates, gaskets from motors, pumps and machinery plus decarbonising lawn mowers, marine outboard motors and motor cycles.

    CRC Strip-Off Paint Stripper also removes graffiti.

    Features & Benefits

    • Ease of use saves time
    • No mess aerosol application for improved user safety
    • Saves on brushes and containers
    • No wastage due to accurate spray
    • Thickness of Gel Coat can be managed easily
    • Doesn’t drip or run
    • Easy clean up
    • Spray gets into hard to reach areas

    Handy Hints

    CRC Strip Off should not be used on fibreglass, plastics, styrene related plastics, vinyl, laminex or laminated surfaces. If used to remove graffiti on painted surfaces, CRC Strip Off may also strip the base colour.

    Contact Us
  • 5106

    Out of stock

    CRC Dielectric Grease Select-A-Bead is a pressurised, non-curing silicone compound used for electrical sealing, lubricating, protecting and insulating.

    CRC Dielectric Grease Select-A-Bead seals connectors exposed to the elements and maintains electrical performance during rain, fog, and salt spray. It is temperature resistant and will not harden, freeze, dry or melt due to temperature fluctuations.

    Silicone based, CRC Dielectric Grease Select-A-Bead lubricates without bulk, keeping contacts clean, reducing wear and helping them slide. It prevents dirt, moisture, rust and oil from penetrating.

    CRC Dielectric Grease Select-A-Bead is particularly useful for boaties who can apply it to battery terminals, spark plugs, electrical contacts, shore power inlets and boat electronics connectors. It is also great for trailer plugs, light bulbs, makes connecting and disconnecting fish finders a breeze, light sockets and anything else electrical that is exposed to the elements.

    The CRC Select-a-Bead™ nozzle allows for easy control of silicone bead width, with a unique double piston pressurized system allowing for smooth, uniform dispensing from start to finish.

    Features & Benefits

    • Ready to use -No additional mixing or chemical additives required.
    • Maximum protection from corrosion – Seals connectors exposed to the elements
    • Silicone-based – Lubricates, keeps contacts clean, reduces wear
    • Damp or extreme conditions – Maintains electrical performance during rain, fog, salt spray and temperature extremes. Ideal for marine applications
    • Temperature Resistant – Maintains performance level year round. Will not harden, freeze, dry or melt due to temperature fluctuations
    • Safe – Does not harm rubber and plastics.
    • Ensures electrical insulation and proper conductivity
    • Easily removed – With petroleum distillates or CRC CO Contact Cleaner

    Uses

    • Electrical components used in damp or extreme conditions – Electrical connectors, contacts, circuit breakers, electrical panels, bulkhead connectors, electrical panels, outdoor lighting, scoreboards, traffic lights, high voltage poles, transformers, disconnects switching mechanisms, electrical contacts, spark plugs, battery terminals, fasteners, trailer connectors, HEI distributor and any other electrical components or connections.
    • Marine applications – Battery terminals, spark plugs, electrical contacts, shore power inlets, boat electronics connectors, trailer plugs, light bulbs, light sockets, makes connecting and disconnecting fish finders a breeze.
    • Rubber and plastic parts – Excellent for lubricating and sealing rubber and plastic parts, including o-rings. Weatherproofs seal on outdoor junction boxes.

    Interchange for CRC5106

    Contact Us
  • 5101

    Out of stock

    CRC5101 AC Charge is an inexpensive, quick way to refill vehicle air-conditioning systems with refrigerant. With the unique All-In-One application method and professional quality R134a refrigerant, it is a fast and effective way to recharge the air conditioning system.

    If the air coming from the air vents in the car is not as cold as it used to be, the air conditioning system could be running low in refrigerant. CRC AC Charge adds refrigerant R134a to the air conditioning system via the low-pressure inlet. The process can be completed within minutes. There is an instructional video here or in the video tab above.

    We all have a part to play in preventing global warming. R134a is a known greenhouse gas and therefore should not be released into the atmosphere. Check that the air-conditioning system does not have any leaks before using CRC AC Charge. We recommend testing the system with a leak detector product such as CRC Leak Detector before using AC Charge. If unsure, it is recommended to consult a vehicle air-conditioning specialist. Under the Climate Change Response Act 2002 it is an offence to knowingly release R134a into the atmosphere.

     

    Features and Benefits

    • Easy to use – Simple clear instructions.
    • Quick – Can be completed in minutes.
    • Professional quality R134a refrigerant.
    • Inexpensive – Cost effective method to recharge air-conditioning systems.

    Uses

    • Efficiently recharges air-conditioning systems by refilling it with R134a refrigerant

    Instructions for use (we also have a step by step video of how to use the product here):

    PLEASE NOTE: Due to being classified as dangerous goods, this product is not available for delivery

    For aerosol refill with the hose, use CRC5100

    Contact Us
  • 5100

    Out of stock

    CRC5100 AC Charge is an inexpensive, quick way to refill vehicle air-conditioning systems with refrigerant. With the unique All-In-One application method and professional quality R134a refrigerant, it is a fast and effective way to recharge the air conditioning system.

    If the air coming from the air vents in the car is not as cold as it used to be, the air conditioning system could be running low in refrigerant. CRC AC Charge adds refrigerant R134a to the air conditioning system via the low-pressure inlet. The process can be completed within minutes. There is an instructional video here or in the video tab above.

    We all have a part to play in preventing global warming. R134a is a known greenhouse gas and therefore should not be released into the atmosphere. Check that the air-conditioning system does not have any leaks before using CRC AC Charge. We recommend testing the system with a leak detector product such as CRC Leak Detector before using AC Charge. If unsure, it is recommended to consult a vehicle air-conditioning specialist. Under the Climate Change Response Act 2002 it is an offence to knowingly release R134a into the atmosphere.

     

    Features and Benefits

    • Easy to use – Simple clear instructions.
    • Quick – Can be completed in minutes.
    • Professional quality R134a refrigerant.
    • Inexpensive – Cost effective method to recharge air-conditioning systems.

    Uses

    • Efficiently recharges air-conditioning systems by refilling it with R134a refrigerant.

    Instructions for use (we also have a step by step video of how to use the product here):

    For aerosol refill without the hose, use CRC5101

    Contact Us
  • 5098

    Out of stock

    CRC Battery Protector is designed to protect battery terminals from corrosion, the leading cause of battery failure, and to maintain the batteries peak performance level.

    CRC Battery Protector provides a dry, lead-free protective coating that keeps moisture, salts and road grime from corroding metal contacts. It maximises performance, provides long lasting protection and extends battery life.

    Features & Benefits

    • Maintains the batteries peak performance level
    • Provides long lasting protection to extend battery life
    • Assures easier starting
    • Soft, Flexible Film. Completely encapsulates exposed surfaces. Will not become brittle, crack or peel. Withstands excessive wear caused by vibration of moving vehicles.
    • Dry Film – Clings tenaciously to metal, resisting water wash-off and repelling moisture.
    • Fast Drying. Reduces maintenance time. Permits quick assembly of battery connections.
    • Yellow Colour. Provides easy visual inspection of application.
    • Aerosol – Easy to apply aerosol

    Uses

    • Recommended for use on battery posts
    • Terminals, hold-downs and casings used in vehicles, boats & machinery
    • Uninterrupted power supplies (UPS)
    • Computer systems and mainframes
    • Security and emergency back-up systems.
    Contact Us
  • 5097

    Out of stock

    CRC Battery Maintenance is an engineered product that penetrates, neutralises and loosens acid corrosion deposits, electrolytes, dirt and moisture from battery terminals and surfaces. It assures maximum battery current flow and promotes longer battery life.

    Features & Benefits

    • Spray on – wipe off.
    • Resists moisture.
    • Neutralises battery acid
    • Promotes longer battery life.
    • Assures maximum battery current flow
    • Eliminates energy loss & reduces voltage leakage
    • Easy to apply aerosol.

    Uses

    • For neutralising battery acid and electrolytes.
    • To help eliminate energy loss and reduces voltage leakage by cleaning dirty
    • connections.
    • To maintain maximum current flow and promote longer battery life.
    • To help prevent corrosion
    • To neutralise dangerous battery acid spills.
    Contact Us
  • 5095

    Out of stock

    CRC GDI Intake Valve & Turbo Cleaner removes carbon build-up commonly found on the backs of Intake Valves and Turbos in all types of petrol powered engines. CRC GDI Intake Valve & Turbo Cleaner dissolves and lifts deposits from valve stems & tops without the need for top engine disassembly.  It achieves this by delivering concentrated advanced COzol® technology directly to the back of intake valves at 150x the concentration of any premium fuel additive.

    Deposits are a major concern and form in every fuel system within just 8,000-16,000kms, but the amount and how quickly they form depends on the quality of fuel and oil you use, driving style, and engine type. GDI engine intake valves are prone to rapid deposit buildup and increased operating temperatures because they never get washed with fuel.

    CRC GDI Intake Valve & Turbo Cleaner increases power and torque.  It cures rough idle, hesitation and stalling and improves airflow and fuel efficiency. CRC GDI Intake Valve & Turbo Cleaner is also effective in standard fuel injected engines.  Safe for use on turbos and intercoolers.

    SYMPTOMS:  Hard starts, rough idle, poor acceleration, reduced fuel economy, excess emissions and power loss.

    FOR MAXIMUM PERFORMANCE:  For the ultimate fuel system cleanup.  Use this product in conjunction with CRC 1-Tank Power Renew® Complete Fuel System Cleanup.  CRC GDI Intake Valve Cleaner treats the “dry” side of the system to clean tough deposits from intake valves, while CRC 1-Tank Power Renew® treats the “wet” side of the fuel system, resulting in the DEFINITIVE cleanup for your fuel system.

    Contact Us
  • 5093

    Out of stock

    CRC Mass Air Flow Sensor Cleaner is a safe and effective way to clean delicate MAF sensors in modern vehicles. Engines rely heavily on accurate readings from the MAF sensor to run smoothly and efficiently. A contaminated sensor is likely to cause poor fuel economy, excessive emission, power loss, hard starting, stalling and even gear problems.

    Located between the air filter and the throttle body, the MAF sensor can easily be cleaned with just a few sprays of CRC Mass Air Flow Sensor Cleaner – it only takes a few minutes.

    For maximum performance use CRC Throt-L-Body and CRC Mass Air Flow Sensor Cleaner every time air filter is serviced.

    Features & Benefits

    • Cleans & Protects MAF Sensors – Will not damage MAF sensors or housing (unlike other chemicals)
    • Plastic Safe & Residue Free – Evaporates in seconds
    • Improves Air/Fuel Ratio
    • Increases km/litre – Improves fuel economy
    • Increases/Restores Horsepower – Gains 4-10 horsepower
    • Reduces Rough Idle
    • Decreases Hesitation & Pinging
    • Comes with Perma Straw – Choose pin-point stream or regular spraying action

    Uses

    • Recommended for the safe and effective cleaning of MAF sensors
    Contact Us
  • 5089

    Out of stock

    CRC5089 Brakleen is a powerful, heavy duty cleaner and degreaser for brake, clutch parts and general mechanical equipment. It is formulated to quickly and safely dissolve and flush away grease, oil, brake fluid, transmission fluid, hardened deposits and other contaminants, without the need for disassembly. It safely settles and removes hazardous brake dust.

    CRC Brakleen is non-staining, non-corrosive, leaves no residue and evaporates quickly.

    CRC Brakleen stops disc brake squeal and noise caused by contaminants, eliminates clutch slippage and helps brakes last longer and perform better. Tests by an independent laboratory show that the proper use of Brakleen brake cleaner improves brake efficiency by reducing stopping distances by as much as 24.3%.

    CRC Brakleen is ideal for removing grease and contaminates from CV joints and wheel bearings and can also be used to clean, degrease or flush away built up dirt, grease and oil from workshop equipment, tools, other mechanical or industrial machinery and electrical contacts.  (Equipment must be de-energised before cleaning. Fully ventilate equipment before re-energising equipment).

     

    Features & Benefits

    • Powerful brake cleaner and degreaser
    • No disassembly required – Saves time and reduces maintenance cost
    • Fast evaporation brake cleaner – Minimises downtime
    • Leaves no residue – Prevents harmful build up and eliminates rinsing and wiping
    • Controlled spray action – Assists cleaning through surface agitation
    • Low surface tension – Gives excellent penetration and ensures superior dissolving and degreasing properties
    • Superior cleaning and degreasing properties – Has many uses beyond brakes
    • MPI Approved C12 (All animal products except dairy)
    • Brakleen / Brakleen Blaster – Asure Quality assessment for food/beverage/dairy factory food areas & no potential contact
    • Brakes last longer and perform better
    • Helps eliminate disc brake squeal and clutch chatter
    • Safely settles and removes hazardous brake dust
    • Stable, non-staining and non-corrosive to metals
    • Does not contain silicone – Can be painted over
    • Aerosol has a 360° (upside-down) valve and extension tube – Ensures that all usable product is expelled from the can evenly when the can is held and sprayed in the upside-down position

    Uses

    • Brakleen brake cleaner, cleans and degreases brake linings, drums, cylinders, brake shoes, disc brake pads, discs, wedge brakes, springs, calipers, clutch discs, wheel bearings, CV joints, wire ropes, winch cables, dies, moulds, equipment, parts & tools
    • For cleaning machinery, motors and general mechanical equipment when a vapour degreaser is required. Can also be used to clean electrical contacts. (Equipment must be de-energised before cleaning. Fully ventilate equipment before re-energising equipment)
    • Great for cleaning most parts of your car and bike. Excellent for cleaning clutch and pressure plates prior to overhaul and reassembly. Use on car, truck or motorcycle engines, mowers, outboard motors. Boat, industrial, mining, farming equipment parts, gears and also concrete driveways
    • Also ideal for flushing away built up dirt, grease and oil that can prevent forklifts and industrial machinery from working efficiently
    • For degreasing components prior to reassembly, especially prior to thread-locking. Preparation for the application of engine sealants, paint or lubricant. Ideal for removing grease and contaminates from CV joints and wheel bearings
    • Car brake cleaner
    Contact Us
  • 5087

    Out of stock

    CRC Brakleen Blaster, the genuine Brakleen formula with a high pressure spray to forcefully cut through and remove thick build-ups, hardened deposits and to clean hard-to-reach areas.
    CRC Brakleen Blaster is a powerful, heavy duty cleaner and degreaser for brake, clutch parts and general mechanical equipment. It is formulated to quickly and safely dissolve and forcefully flush away grease, oil, brake fluid, transmission fluid, hardened deposits and other contaminants, without the need for disassembly. It safely settles and removes hazardous brake dust.

    CRC Brakleen Blaster is non-staining, non-corrosive, leaves no residue and evaporates quickly.
    CRC Brakleen Blaster stops disc brake squeal and noise caused by contaminants, eliminates clutch slippage and helps brakes last longer and perform better. Tests by an independent laboratory show that the proper use of Brakleen improves brake efficiency by reducing stopping distances by as much as 24.3%.
    CRC Brakleen Blaster is ideal for removing grease and contaminates from CV joints and wheel bearings and can also be used to clean, degrease or flush away built up dirt, grease and oil from workshop equipment, tools, other mechanical or industrial machinery and electrical contacts (Equipment must be de-energised before cleaning. Fully ventilate equipment before reenergising equipment.)

     

     

    Features & Benefits

    • Extreme grease penetration power, high pressure spray – Specifically formulated to forcefully cut through and remove thick build-ups, hardened deposits and to clean hard-toreach areas
    • No disassembly required – Saves time and reduces maintenance cost
    • Fast evaporation – Minimises downtime
    • Leaves no residue – Prevents harmful build up and eliminates rinsing and wiping
    • Superior cleaning and degreasing properties – Has many uses beyond brakes
    • Brakes last longer and perform better
    • Helps eliminate disc brake squeal and clutch chatter
    • Safely settles and removes hazardous brake dust
    • Stable, non-staining and non-corrosive to metals
    • Low surface tension – Gives excellent penetration and ensures superior dissolving and degreasing properties
    • Low flammability
    • Does not contain silicone – Can be painted over
    • Contains more than 97% active content
    • Aerosol has a 360⁰ (upside-down) valve and extension tube – Ensures that all usable product is expelled from the can evenly when the can is held and sprayed in the upside down position
    • MPI Approved C12 (All animal products except dairy)
    • Asure Quality assessment for food/beverage/dairy factory food areas & no potential contact

    Uses

    • Brakleen brake cleaner, cleans and degreases brake linings, drums, cylinders, brake shoes, disc brake pads, discs, wedge brakes, springs, calipers, clutch discs, wheel bearings, CV joints, wire ropes, winch cables, dies, moulds, equipment, parts & tools
    • For cleaning machinery, motors and general mechanical equipment when a vapour degreaser is required. Can also be used to clean electrical contacts. (Equipment must be de-energised before cleaning. Fully ventilate equipment before re-energising equipment)
    • Great for cleaning most parts of your car and bike. Excellent for cleaning clutch and pressure plates prior to overhaul and reassembly. Use on car, truck or motorcycle engines, mowers, outboard motors. Boat, industrial, mining, farming equipment parts, gears and also concrete driveways
    • Also ideal for flushing away built up dirt, grease and oil that can prevent forklifts and industrial machinery from working efficiently
    • For degreasing components prior to reassembly, especially prior to thread-locking. Preparation for the application of engine sealants, paint or lubricant. Ideal for removing grease and contaminates from CV joints and wheel bearings
    • Car brake cleaner
    Contact Us
  • 5083

    Out of stock

    CRC Brakleen Fast Dry is a powerful, fast drying, non-chlorinated solvent blend with superior cleaning and degreasing properties that minimise down-time. It is formulated to quickly and safely dissolve and flush away grease, oil, brake fluid, transmission fluid, hardened deposits and other contaminants, without the need for disassembly. It safely settles and removes hazardous brake dust.

    CRC Brakleen Fast Dry is non-staining, non-corrosive, leaves no residue and evaporates quickly.

    CRC Brakleen Fast Dry stops disc brake squeal and noise caused by contaminants, eliminates clutch slippage and helps brakes last longer and perform better. Tests by an independent laboratory show that the proper use of Brakleen improves brake efficiency by reducing stopping distances by as much as 24.3%.

    CRC Brakleen Fast Dry is ideal for removing grease and contaminates from CV joints and wheel bearings and can also be used to clean, degrease or flush away built up dirt, grease and oil from workshop equipment, tools, other mechanical or industrial machinery and electrical contacts (Equipment must be de-energised before cleaning. Fully ventilate equipment before reenergizing equipment).

    Contact Us
  • 5081

    Out of stock

    CRC Clean-R-Carb is an effective in-place carburettor cleaner that removes deposits of gum, varnish, lacquer, resin paraffin, metallic salts, oil, oxides, tar and gasoline stains. Regular cleaning with CRC Clean-R-Carb prevents gum deposit build-up in carburettors, giving faster starting, smooth idling and improved petrol economy.

    CRC Clean-R-Carb removes carbon build-up and deposits on injectors, alloy heads, cylinders, pistons and linkages eliminating the need to use wire brushes thus avoiding damage to soft metal alloys.

    Features & Benefits

    • Dissolves carburettor deposits
    • Restores engine power
    • Maximises fuel economy
    • Non-corrosive degreaser
    • Cleans without disassembly

    Uses

    • Removes gum, varnish, lacquer, resin paraffin, metallic salts, oil, oxides, tar and gasoline stains.
    • Suitable for use on injectors, alloy heads, cylinders, pistons and linkages.
    • General parts cleaner.
    Contact Us
  • 5079

    Out of stock

    CRC Grey RTV Gasket Sensor Safe is formulated for high torque applications (predominantly Japanese designs) and has an intermittent service temperature of up to 330°C.

    CRC Grey RTV Gasket Sensor Safe is a self-forming room temperature vulcanising Silicone that replaces almost any cut gasket, felt, cork, paper, asbestos and rubber gaskets. No gasket sealers are required – the pure silicone rubber forms to any size and shape quickly.

    CRC Grey RTV Gasket Sensor Safe features low odour and is non-corrosive with excellent oil resistance. It resists migrating caused by thermal cycles, cracking, shrinking and vibration and is highly resistant to auto and shop fluids.

    Do not use as a head gasket, not suitable for stove pipes or in fireplaces.

    Features & Benefits

    • Sensor safe
    • Intermittent service temperature of up to 330°C
    • Makes any size or shape of gasket in minutes
    • Replaces most automotive gaskets
    • Odourless, non-corrosive, safe for all models, excellent oil resistance
    • Easy to apply
    • Excellent adhesion

    Uses

    • Rear main bearing cap split line
    • Damper keyway sealing
    • Differential cover, intake and seals
    • OHC cap
    • Oil pan corner seals
    • Oil pan gasket
    • Side cover plate
    • Thermostat housing
    • Timing cover
    • Transmission pan
    • Valve cover gasket
    • Vibration damper
    • Water pump cover gasket
    • Intake manifolds
    Contact Us
  • 5078

    Out of stock

    CRC Red RTV Gasket 340 is formulated for heavy duty, high temperature applications with an intermittent service temperature of up to 340ºC.

    CRC Red RTV Gasket 340 is a self-forming room temperature vulcanising Silicone that replaces almost any cut gasket, felt, cork, paper, asbestos and rubber gaskets. No gasket sealers are required – the pure silicone rubber forms to any size and shape quickly.

    CRC Red RTV Gasket 340 resists migrating caused by thermal cycles, cracking, shrinking and vibration. It is ideal for high temperature, high pressure applications, it will remain flexible and durable.

    CRC Red RTV Gasket 340 is NOT recommended for use on copper and brass. Do not use as a head gasket, not suitable for stove pipes or in fireplaces.

    Features & Benefits

    • Intermittent service temperature of up to 340°C
    • Makes any size or shape of gasket in minutes
    • Ideal for high temperature high pressure applications
    • Replaces most gaskets
    • Remains flexible and durable
    • Easy to apply

    Uses

    • General machinery and automotive gasketing
    • Valve rocker cover
    • Timing chain cover
    • Thermostat housing
    • Transmission pan
    • Side cover plate
    • Water outlet/inlet
    • Water pump cover gasket
    • Intake manifold
    • Oil pan corner seals
    • Differential cover
    Contact Us
  • 5077

    Out of stock

    CRC Throt-L-Body is an effective blend of liquid hydrocarbon cleaning compounds specifically formulated to remove and prevent harmful deposits from throttle bodies and air intake systems in fuel-injected vehicles. It does not harm coatings on modern throttle body surfaces that are applied during the manufacturing process to allow for controlled and undisturbed airflow.

    Stalling and rough idling is often caused by a build-up of deposits from airborne contaminants or oil and combustion gases in the throttle body. Regular cleaning with CRC Throt-L-Body restores engine performance, improves fuel economy, reduces engine wear and prevents build-up while lubricating moving parts.

    For maximum performance use CRC Throt-L-Body and CRC Mass Air Flow Sensor Cleaner every time air filter is serviced.

    Features & Benefits

    • Removes and prevents build-up of harmful throttle body deposits
    • Restores engine performance
    • Improves fuel economy
    • Reduces engine wear
    • Safe on coatings, sensors, o-ring seals and other sensitive components
    • Lubricates and protects moving parts
    • 360° upside down valve and extension tube for added convenience and pinpoint application

    Uses

    • Recommended for the cleaning of throttle bodies, throttle valves, linkages and air intake systems in fuel-injected vehicles.
    • Suitable for cleaning carburetors.
    Contact Us
  • 5073

    Out of stock

    CRC Hot Shot Degreaser is a highly concentrated, self-emulsifying solvent degreaser specially formulated to quickly cut and remove grease, grime, oil and dirt on engines and all types of equipment. It rinses off easily and leaves no residue.

    After rinsing the motor with water, use CRC 5.56 to displace moisture in the distributor and other ignition/electrical parts, if the motor is difficult to start.

    Features & Benefits

    • Concentrated degreasing jet of cleaning solution
    • Quickly lifts grease, grime, oil and dirt off engines and equipment
    • Rinses off easily with water and leaves no residue
    • Non-corrosive
    • Solvent based
    • Contains No CFC’s
    • Cleans iron, steel, aluminium, magnesium and copper
    • Not harmful to metal, rubber, plastic or concrete

    Uses

    • For cleaning and degreasing most metal surfaces including:
    • Automotive engines – cars, trucks, boats etc
    • Chain saws
    • Lawn mowers
    • Farm machinery and equipment
    • Construction equipment
    • Industrial equipment
    • Tools
    • Garage Floors
    • Spray on degreasers
    • Degreasing sprays
    • Degreasing products
    • Engine degreasers
    • Multi purpose degreaser
    Contact Us
  • 5070

    Out of stock

    CRC Aeroclean Degreaser delivers a concentrated jet of cleaning solution that dissolves and removes oil and grease from dirty engines. It leaves a detergent on the surface which emulsifies the remaining contaminants when flushed with water. CRC AeroClean Degreaser restores and improves the appearance of your engine. It is a unique combination of non-corrosive surfactants, …

    CRC Aeroclean Engine Degreaser 500ml AerosolRead More

    Contact Us
  • 5069

    Out of stock

    CRC Oil Eater is a revolutionary new product, that effectively removes oil stains from porous surfaces. Effective on concrete floors and driveways, paving, cobbles, masonry, timber, heavy duty carpets and mats. Oil Eater is ideal for all automotive, industrial and household needs.

    Whether it be leaks, spills, drips, drops or stains, simply spray Oil Eater on the oil stain, and allow to dry to a powder, absorbing the oil and pulling it to the surface in the process. Then easily sweep or hose off.

    Features:
    • Removes oil and grease stains.
    • Works on concrete, paving, cobbles, masonry, timber, heavy duty carpets and mats.
    • Simple spray on brush off formula.
    • Rapid formula works in just 1-2 hours.

    CAUTION – DO NOT USE on asphalt surfaces. Test in an inconspicuous area before using on sealed concrete, coloured or painted surfaces and carpet. Prior use of other cleaners may impact results.

    Contact Us
  • 5047

    Out of stock

    CRC Wet Look produces a durable, ultra-high gloss, wet look shine for tyres, mudflaps and bumpers. Quick and easy – simply spray on and let the unique formula produce an intense, long lasting wet look shine. No rinsing, wiping or rubbing required. CRC Wet Look will make tyres look clean and like new and is ideal for …

    CRC Wet Look Aerosol 500 mlRead More

    Contact Us
  • 5046

    Out of stock

    CRC Dry Look produces a durable, deep natural black finish for tyres, mudflaps and bumpers. Quick and easy – simply spray on and let the unique formula produce an intense, long lasting low sheen finish. No rinsing or rubbing required. CRC Dry Look will make tyres look clean and like new and Is ideal for …

    CRC Dry Look Aerosol 500 mlRead More

    Contact Us
  • 5045

    Out of stock

    CRC So Easy Tyre Cleaner cleans, protects and shines tyres in one easy step, leaving a rich satin finish. Simply apply CRC So Easy Tyre Cleaner directly onto tyres – unlike other car tyre cleaners, no rinsing, wiping or rubbing is required. The non-acid formula quickly penetrates into the rubber, lifting and releasing dirt and road grime. The …

    CRC So Easy Tyre Cleaner Aerosol 500 mlRead More

    Contact Us
  • 5044

    Out of stock

    CRC De-Icer instantly dissolves ice, snow or frost. Simply spray at the top of the windscreen and CRC De-Icer will dissolve into the build-up. The non-smear formula actively fights re-freeze and keeps windscreens crystal clear. CRC De-Icer is harmless to glass, rubber, plastics, vinyls and all automotive finishes. Ideal for use on automotive windscreens, to …

    CRC De-Icer Aerosol 400 mlRead More

    Contact Us
  • 5040

    Out of stock

    CRC Engine Start helps rapid initial start up for all slow-to-start diesel and petrol engines (both two-stroke and four-stroke). When sprayed into the air cleaner, the special formulation of CRC Engine Start significantly lowers the energy required for immediate combustion. CRC Engine Start assists low batteries, weak ignition and improves starts in cold or humid …

    CRC Engine Start Aerosol 400 mlRead More

    Contact Us
  • 5035

    Out of stock

    CRC TAC 2 is an exceptional general purpose lubricant with tough adhesive qualities. Based on heavy-duty high-pressure gear oil and modified to resist fling-off at high speed and high temperatures, CRC TAC 2 is ideal for lubrication and protection of gears, sprockets, chains and sliding parts in industrial applications – reliable and well proven. On application CRC TAC 2 penetrates …

    CRC TAC-2 Adhesive Lubricant Aerosol 400 mlRead More

    Contact Us
  • 5033

    Out of stock

    CRC5033 Aqua Armour is a high-strength, multi-purpose water repellent, providing long-lasting waterproofing for outdoor applications and fabrics.

    CRC Aqua Armour penetrates beyond the surface of the fabric, forming a strong and long-lasting protective barrier. Keeping moisture out while leaving no stickiness, discolouration or stiffness.

    CRC Aqua Armour is ideal for sports gear, outerwear, tents, footwear, snow and ski gear, back packs, camping gear, outdoor furniture, and much more. It is also perfect for fabric protection, covering a wide range including nylon, canvas, polyester, cotton and much more.

    Features and Benefits: 

    • High-strength waterproofing
    • Long-lasting protective barrier
    • Allows fabric to breathe
    • Repels moisture during usage and in storage
    • Leaves no stickiness, discolouration or stiffness
    • Wide range of fabric and outdoor application coverage

    Uses: 

    • Ideal for sports gear, outerwear, tents, footwear, snow and ski gear, back packs, camping gear, outdoor furniture, and much more.
    • It is also perfect for fabric protection, covering a wide range including nylon, canvas, polyester, cotton and much more
    Contact Us
  • 5029

    Out of stock

    CRC 556 Multi-purpose is a service spray that penetrates, lubricates and prevents corrosion. The original toolkit in a can. CRC 5.56 Multi-purpose forms a thin film that lubricates moving parts for smooth action and silences annoying squeaks and squeals. Superior penetrating power breaks through rust and corrosion, loosens rusted parts, displaces water from wet equipment …

    CRC 5-56 Multipurpose Aerosol 380 mlRead More

    Contact Us
  • 5028

    Out of stock

    CRC 556 Multi-purpose is a service spray that penetrates, lubricates and prevents corrosion. The original toolkit in a can. CRC 5.56 Multi-purpose forms a thin film that lubricates moving parts for smooth action and silences annoying squeaks and squeals. Superior penetrating power breaks through rust and corrosion, loosens rusted parts, displaces water from wet equipment …

    CRC 5-56 Multipurpose Aerosol 210 mlRead More

    Contact Us
  • 5024

    Out of stock

    CRC Liquid Armour is a vinyl and rubber protectant that protects a number of surfaces including vinyl, wood, plastic and rubber trim, fibreglass, chrome, dashboards and wood. It forms a long-lasting, non-greasy protective barrier on and under the surface, guarding against cracking, dulling, fading and UV damage offering great protection from the sun. Materials treated with CRC …

    CRC Liquid Armour Pail 4 litreRead More

    Contact Us
  • 5023

    Out of stock

    CRC Liquid Armour is a vinyl and rubber protectant that protects a number of surfaces including vinyl, wood, plastic and rubber trim, fibreglass, chrome, dashboards and wood. It forms a long-lasting, non-greasy protective barrier on and under the surface, guarding against cracking, dulling, fading and UV damage offering great protection from the sun. Materials treated with CRC …

    CRC Liquid Armour Spray Bottle 250 mlRead More

    Contact Us
  • 5022

    Out of stock

    CRC Liquid Armour is a vinyl and rubber protectant that protects a number of surfaces including vinyl, wood, plastic and rubber trim, fibreglass, chrome, dashboards and wood. It forms a long-lasting, non-greasy protective barrier on and under the surface, guarding against cracking, dulling, fading and UV damage offering great protection from the sun. Materials treated with CRC …

    CRC Liquid Armour Trigger 500 mlRead More

    Contact Us
  • 5021

    Out of stock

    CRC Gasket Stripper is a powerful formulation that quickly and easily removes tough bonded gaskets and most types of gasket adhesives and sealants regardless of age or adhesive resistance. It also removes dried oil, grease, paint, enamel, urethane, varnish, graffiti, stickers and decals. CRC Gasket Stripper will instantly soften old gasket cement for quick removal …

    CRC Gasket Stripper Aerosol 300 gRead More

    Contact Us
  • 5018

    Out of stock

    CRC Multilube Gel is a unique synthetic penetrating gel specifically formulated to provide a clean, odourless lubricant for high-pressure and high-temperature applications. It contains friction modifiers, anti-wear additives and tacking agents, does not drip off or fling off at high speed and resists hot and cold wash-off for long-lasting protection. It is ideally suited for highly …

    CRC Multilube Gel Aerosol 210 mlRead More

    Contact Us
  • 5017

    Out of stock

    CRC Disc Brake Quiet is an elastomeric multi-polymer compound specially formulated to protect and lubricate critical brake parts. It stops disc brake noises and increases brake life. CRC Disc Brake Quiet is easily applied to the back of disc brake pads where it forms a water and high temperature resistance film that acts as a vibration and …

    CRC Disc Brake Quiet Aerosol 255 gRead More

    Contact Us
  • 5014

    Out of stock

    CRC Multilube Gel is a unique synthetic penetrating gel specifically formulated to provide a clean, odourless lubricant for high-pressure and high-temperature applications. It contains friction modifiers, anti-wear additives and tacking agents, does not drip off or fling off at high speed and resists hot and cold wash-off for long-lasting protection. It is ideally suited for highly …

    CRC Multilube Gel Aerosol 500 mlRead More

    Contact Us
  • 5013

    Out of stock

    CRC Auto Electronic Cleaner is an inert high purity cleaning solvent formulated for use on precision instruments, equipment and components. It removes dirt, tarnish, dust, grease, oil and other deposits preventing arcing between dry contacts. CRC Auto Electronic Cleaner is non-conductive and leaves no residue.  It is fast drying and safe to use on plastic and rubber. …

    CRC Auto Electronic Cleaner Aerosol 400 mlRead More

    Contact Us
  • 5009

    Out of stock

    CRC 5-56 Multi-purpose is a service spray lubricant that penetrates, lubricates and prevents corrosion. It’s the original toolkit in a can. It forms a thin dry film that lubricates moving parts for smooth action and silences annoying squeaks and squeals. Superior penetrating power breaks through rust and corrosion, loosens rusted parts, displaces water from wet equipment …

    CRC 5-56 Multipurpose Can 20 litreRead More

    Contact Us
  • 5007

    Out of stock

    CRC 556 Multi-purpose is a service spray lubricant that penetrates, lubricates and prevents corrosion. It’s the original toolkit in a can. It forms a thin dry film that lubricates moving parts for smooth action and silences annoying squeaks and squeals. Superior penetrating power breaks through rust and corrosion, loosens rusted parts, displaces water from wet equipment …

    CRC 5-56 Multipurpose 4 LitreRead More

    Contact Us
  • 5005

    Out of stock

    CRC 556 Multi-purpose is a service spray lubricant that penetrates, lubricates and prevents corrosion. It’s the original toolkit in a can. It forms a thin dry film that lubricates moving parts for smooth action and silences annoying squeaks and squeals. Superior penetrating power breaks through rust and corrosion, loosens rusted parts, displaces water from wet equipment …

    CRC 5-56 Multipurpose Aerosol 400gmRead More

    Contact Us
  • 4000

    Out of stock

    CRC4000 Hand pump sprayer for CRC 5-56 range.

    Adjustable spray for mist or stream.

    Contact Us
  • 3825

    Out of stock

    CRC3825 Safety Grip provides a durable and long-lasting textured coating to most surfaces. The quality epoxy resin formula stands up to tough industrial applications, providing a safe and effective slip resistant coating which is tack free in just 1 hour. CRC Safety Grip has excellent oil, gas and chemical resistance, and has superior durability over tape applications with no peeling and cracking.

    Features & Benefits:

    • Quality epoxy resin formula
    • Industrial strength application and durability
    • Excellent oil, gas and chemical resistance
    • Tack free in 1 hour
    • Adheres to wood, fibreglass, cement and most metals

    Uses:

    • Ideal for floors, stairs, ladders, ramps, tool handles, railings, boat ramps, as well as any surface exposed to moisture.
    Contact Us
  • 3824

    Out of stock

    CRC3824 Safety Grip provides a durable and long-lasting textured coating to most surfaces. The quality epoxy resin formula stands up to tough industrial applications, providing a safe and effective slip resistant coating which is tack free in just 1 hour. CRC Safety Grip has excellent oil, gas and chemical resistance, and has superior durability over tape applications with no peeling and cracking.

    Features & Benefits:

    • Quality epoxy resin formula
    • Industrial strength application and durability
    • Excellent oil, gas and chemical resistance
    • Tack free in 1 hour
    • Adheres to wood, fibreglass, cement and most metals

    Uses:

    • Ideal for floors, stairs, ladders, ramps, tool handles, railings, boat ramps, as well as any surface exposed to moisture.
    Contact Us
  • 3420

    Out of stock

    The CRC Exoff Range provides uncompromised performance and safety. Next generation high performance cleaning technology, pH neutral, safe on surfaces, users and the environment. CRC FOOD GRADE PARTS CLEANER AND DEGREASER – EXTRA HEAVY DUTY  Formulated to penetrate and dissolve tough grease, animal fats and oils for easy removal – safely. Use confidently on all metals …

    CRC EXOFF Food Grade Degreaser & Parts Cleaner Trigger 750 mlRead More

    Contact Us
  • 3417

    Out of stock

    The CRC Exoff Range provides uncompromised performance and safety. Next generation high performance cleaning technology, pH neutral, safe on surfaces, users and the environment. CRC EXOFF WORKSHOP CLEANER – HEAVY DUTY  Designed to quickly and effectively remove grease, oil and other contaminants from almost any washable surface – safely. Use confidently on all metals and alloys …

    CRC EXOFF Workshop Cleaner Trigger 750 mlRead More

    Contact Us
  • 3415

    Out of stock

    The CRC Exoff Range provides uncompromised performance and safety. Next generation high performance cleaning technology, pH neutral, safe on surfaces, users and the environment. CRC EXOFF HARD SURFACE CLEANER  Specifically formulated to remove light contamination of grease, oil, dirt and grime from any washable surface – safely. Use confidently on all metals and alloys – will …

    CRC EXOFF Hard Surface Cleaner Trigger 750 mlRead More

    Contact Us
  • 3410

    Out of stock

    The CRC Exoff Range provides uncompromised performance and safety. Next generation high performance cleaning technology, pH neutral, safe on surfaces, users and the environment. CRC EXOFF DEGREASER AND PARTS CLEANER – EXTRA HEAVY DUTY Formulated to penetrate and dissolve tough grease, oil and contaminants for easy removal – safely. Use confidently on all metals and alloys …

    CRC EXOFF Degreaser & Parts Cleaner Trigger 750 mlRead More

    Contact Us
  • 3352

    Out of stock

    CRC Peel Off uses the natural power of d-Limonene to soak through paper labels and release adhesive backings. Once released, the label can be easily removed from most containers and surfaces. Residue can be easily removed with a wet cloth. CRC Peel Off can also be used to clean off cured adhesive and to remove industrial ink from …

    CRC Peel Off Label Remover Aerosol 400 mlRead More

    Contact Us
  • 3331

    Out of stock

    CRC Anti-Seize Engine Assembly Lube provides protection from scoring, galling and seizing on all types of engines during the installation and assembly of parts as well as the critical 5 to 10 second period of initial engine start-up and break-in. This specially formulated lithium based compound fortified with molybdenum, graphite and an advanced additive package, …

    CRC Anti-Seize Engine Assembly Lube Tube 10 ozRead More

    Contact Us
  • 3310

    Ex Supplier

    ADOS Food Grade Sealant is a low modulus silicone joint sealant with 100% neutral cure. This highly flexible sealant contains additives to resist mould and mildew, with excellent adhesion to plastics, ceramics, stainless steel, metals and glass. It is specially formulated for use in food, pharmaceutical and other clean environments where MPI certification is required, …

    ADOS Food Grade Silicone Sealant White Cartridge 300 gRead More

    Add to cart
  • 3222

    Out of stock

    CRC LanoCote is an environmentally friendly product which exhibits superior corrosion protection and anti-seize properties. It offers outstanding, long-lasting protection in harsh conditions without compromising treated materials or harming the environment. Blended from lanolin, an all-natural product, CRC LanoCote is non-toxic, non-carcinogenic and biodegradable. It does not contain copper, lead, silicones, acids, kerosene or dieselene …

    CRC LanoCote Natural Aerosol 500 mlRead More

    Contact Us
  • 3141

    Out of stock

    CRC Molygraph EP Multi-Purpose Grease is a general purpose lithium based grease for a wide range of applications. Enhanced with molybdenum disulfide MoS2, graphite, and other anti-wear and extreme pressure additives, it establishes a fine micron plating on all working surfaces, and provides excellent mechanical and shear stability. It withstands heavy loads, water attack, shock …

    CRC Molygraph EP Multi-Purpose Grease Pot 397 gRead More

    Contact Us
  • 3097

    Out of stock

    When it comes to rust prevention products, CRC Long Life Anti Rust is the complete package. Providing superior lubrication and long-term rust prevention to all metals subjected to rust and salt corrosion. It is an excellent rust inhibitor and lubricant for extending the life of metal to metal sliding/rotating surfaces. CRC Long Life Anti Rust …

    CRC Long Life Anti Rust Aerosol 300 gRead More

    Contact Us
  • 3081

    Out of stock

    CRC3081 Belt Grip is a synthetic polymer based formulation specially developed to meet the demand for a true industrial and automotive food grade belt dressing. It adheres strongly to any commonly used belt material and forms a tacky, non drying, water resistant film that extends belt life by improving traction and reducing belt tension, slipping and dirt build-up. Belts remain pliable and will not glaze or harden while squeaking noise will be reduced.

    CRC Belt Grip is designed to be used on leather, rubber, canvas or fabric and is ideally suited for flat, round and V-belts. Not suited for use on multi-V-belts.

    Features & Benefits

    • Tacky, non drying, water resistant film – Minimises drive belt slippage, resists water wash off, maintains belt flexibility and prevents loads from slipping on conveyor systems
    • Improves traction and reduces belt tension – Relieving stress on motors, shafts and wheels for improved operating efficiency and extended belt life
    • Colourless – Will not stain finished goods transported on conveyor systems
    • Suitable for most belts and belt material – Flat, round or V belts. Leather, rubber, canvas or fabric
    • Not suitable for multi-V-belts
    • Indoor and outdoor use – Even in difficult hot and/or humid conditions
    • No known ozone depleting chemicals
    • MPI Approved C12
    • Includes Permastraw™ Dual-Action Spray System – One piece actuator with two-way spray that ensures that straw stays in place

    Uses

    • Recommended for use in industrial machinery, conveyor systems, portable motorised equipment and vehicle belts
    • Compressors, pumps, generators, fans, motors, automobiles, lift trucks
    • Designed to be used on leather, rubber, canvas or fabric and is ideally suited for flat, round and V-belts. Not suited for use on multi-V-belts.
    Contact Us
  • 3076

    Out of stock

    CRC XD8 is an industrial strength citrus-based cleaner and degreaser formulated for powerful natural cleaning in industrial applications. The natural d-Limonene oil penetrates and lifts contaminants from surfaces, leaving them clean with no oily residue. It rips through grease, tar, oil, gunge, adhesives, paints, inks, waxes and silicone – ideal for cleaning of moulds and …

    CRC XD8 Ultra Heavy Duty Cleaner & Degreaser Aerosol 500 mlRead More

    Contact Us
  • 3071

    Out of stock

    CRC Glass Cleaner is a glass cleaner with a professional formula quickly that easily removes tough dirt and grime including grease, fingerprints, bugs and smoke haze. It leaves glass sparkling and free from streaks and smears. Its special surfactants help prevent misting when used on a regular basis. It is also an ideal fixing lubricant for …

    CRC Glass Cleaner Trigger 500 mlRead More

    Contact Us
  • 3070

    Out of stock

    CRC Glass Cleaner is a glass cleaner with a professional formula quickly that easily removes tough dirt and grime including grease, fingerprints, bugs and smoke haze. It leaves glass sparkling and free from streaks and smears. Its special surfactants help prevent misting when used on a regular basis. It is also an ideal fixing lubricant for …

    CRC Glass Cleaner Aerosol 500 mlRead More

    Contact Us
  • 3064

    Out of stock

    CRC CDT Cutting compounds are superior neat cutting, drilling tapping, and reaming lubricants, formulated for hand and machine cutting on all types of metal. They significantly reduce friction and wear,  increase cutting speeds, protect and extend tool life, and ensure consistent, high quality surface finish. CRC CDT Cutting compounds contain extreme pressure additives and create …

    CRC CDT Cutting Liquid Bottle 500 mlRead More

    Contact Us
  • 3063

    Out of stock

    CRC CDT Cutting compounds are superior neat cutting, drilling tapping, and reaming lubricants, formulated for hand and machine cutting on all types of metal. They significantly reduce friction and wear,  increase cutting speeds, protect and extend tool life, and ensure consistent, high quality surface finish. CRC CDT Cutting compounds contain extreme pressure additives and create …

    CRC CDT Cutting Oil Aerosol 400 mlRead More

    Contact Us
  • 3056

    Out of stock

    CRC 808 Silicone is a multi-purpose silicone spray for general lubrication. It leaves a thin, clear, odourless film that lubricates, waterproofs and revives without damaging treated surfaces or leaving marks or stains. It provides ongoing protection over a wide range of temperatures and pressures. CRC 808 Silicone eliminates squeaking and binding caused by friction and …

    CRC 808 Silicone Can 4 litreRead More

    Contact Us
  • 3055

    Out of stock

    CRC 808 Silicone is a multi-purpose silicone spray for general lubrication. It leaves a thin, clear, odourless film that lubricates, waterproofs and revives without damaging treated surfaces or leaving marks or stains. It provides ongoing protection over a wide range of temperatures and pressures. CRC 808 Silicone eliminates squeaking and binding caused by friction and …

    CRC 808 Silicone Aerosol 500 mlRead More

    Contact Us
  • 3043

    Out of stock

    CRC Food Grade Silicone is a multi-purpose dry film silicone lubricant for use on food processing and handling equipment. It forms a colourless, odourless film that does not attract dust and product debris. It lubricates and protects in most metal and non-metal applications without damaging treated surfaces or leaving marks or stains.

    CRC Food Grade Silicone eliminates binding and sticking and is an excellent release and parting agent.

    Temperature Range from -40°C to +200°C. MPI Approved C15. NZ AsureQuality assessment for food/beverage including dairy factories with incidental contact. NSF H1 Registered for incidental food contact.

    Features & Benefits

    • Dry film – Does not attract dust and product debris
    • Excellent release and parting agent – Ideal to streamline processes on food sorting and handling lines, products will not stick to treated surfaces
    • General lubricant for all surfaces – Metals, plastics, rubber, adhesives, wood, fabrics, glass, inks and paints
    • Resists Moisture – Stays in place in damp environments
    • 360 degree valve – Aerosol can be sprayed from any position even upside down
    • Non-toxic, colourless, odourless, tasteless
    • Wide Temperature range – Effective from -40°C to +200°C
    • MPI Approved C15
    • NZ AsureQuality assessment for food/beverage including dairy factories with incidental contact
    • NSF H1 Registered for incidental food contact

    Uses

    • For use on food processing and handling equipment directly exposed to food products – Scales, fans, carts, galleys, fillers, chutes, guides, rails, conveyors, bottling machinery, slicers, ovens, fridges, freezers, knives and saws
    • Excellent release and parting agent – Horticultural and other food handling and sorting lines, product will not stick to equipment. Mixers, moulders, pie warmers, candy floss and  popcorn machines.
    • Recommended for food packaging machinery – Does not attract airborne paper/cardboard particles or product debris
    • Also recommended for metal-to-nonmetal and plastic-to-plastic lubrication applications

    Product Literature

    Contact Us
  • 3040

    Out of stock

    CRC Dry Glide PTFE is a technically advanced multi-purpose dry film lubricant that cures to a non-staining micro thin film. It penetrates and bonds to metal, wood, rubber, glass and most other surfaces and provides long lasting lubrication where conventional wet film lubricants are difficult to apply or retain. Ideal for lubrication in dusty environments where …

    CRC Dry Glide Aerosol 150 gRead More

    Contact Us
  • 3036

    Out of stock

    CRC3036 Silicone Grease is a thin, non-curing silicone grease designed for sealing, lubricating, and waterproofing o-rings and other rubber and plastic parts. It insulates valves, electrical contacts, spark plugs, battery terminals, and fasteners from moisture, and protects against corrosion.

    It is resistant to oil, water and chemicals and with a temperature range of -40°C to +200°C it will not harden, freeze, dry or melt.

    Food Grade option available for this product

    Features & Benefits

    • Seals, lubricates, protects, insulates and waterproofs
    • Temperature resistant – Maintains performance level year round. Will not harden, freeze, dry or melt due to temperature fluctuations
    • Safe on most rubber and plastics – Will not degrade seals, gaskets or plastic insulators
    • Chemical, oil and water resistant

    Uses

    • Recommended for use on plastics and rubber components
    • O-Rings, spark plugs, fasteners, battery terminals, electrical contacts, valves, gaskets
    Contact Us
  • 3022

    Out of stock

    CRC LanoCote is an environmentally friendly product which exhibits superior corrosion protection and anti-seize properties. It offers outstanding, long-lasting protection in harsh conditions without compromising treated materials or harming the environment.

    Blended from lanolin, an all-natural product, CRC LanoCote is non-toxic, non-carcinogenic and biodegradable. It does not contain copper, lead, silicones, acids, kerosene or dieselene and does not harm metals, plastics, paints, fibreglass, rubber, neoprene, formica and other synthetic materials.

    Lanolin is naturally hydrophobic (water-repellant) and due to its affinity to metals, CRC LanoCote forms a highly effective moisture barrier on surfaces, stays flexible and does not dry out or wash off.

    CRC LanoCote provides long-term natural protection for metals from corrosive effects of salt, acids and most alkalis and inhibits oxidation and galvanic corrosion even in extreme corrosive conditions. It provides superior natural protection for machinery and threaded devices exposed to corrosion. It is unmatched in saltwater environment – ideal for all marine applications.

    CRC LanoCote acts as a release agent and thread-lubricant with excellent anti-seize properties to prevent galling and seizure. Applied during assembly, CRC LanoCote will greatly assist in disassembly years later.

    CRC LanoCote is entirely passive with no conductive ingredients. CRC LanoCote’s natural composition and odour makes it pleasant to work with and does not effect the environment or repel wildlife.

    Features & Benefits

    • Environmentally friendly – Blended from natural and other non-toxic ingredients, biodegradable, pleasant natural odour
    • Safe – Non-toxic, non-carcinogenic
    • Harmless to material – Does not harm metals, plastics, paints, fiberglass, rubber, neoprene, formica and other synthetic materials
    • Ready to Use – No additional mixing or chemical additives required
    • Versatile – Corrosion inhibitor, anti-seize, release agent, lubricant
    • Powerful – Heavy-duty protection in harshest conditions
    • Long-lasting – Protecting film does not dry out or wash off
    • Non-conductive, non-static – Suitable for electrical work
    • Anti-spatter properties – Great for cutting, welding or drilling work
    • Hydrophobic (water-repellant) – Promotes water displacement from surfaces and waterproofs
    • Highly resistant to humidity, salt water and salt spray – Ideal for marine applications
    • Wide range of Applications – Industrial, engineering and construction, agriculture and farming, marine, automotive and numerous other indoor and outdoor uses
    • MPI Approved C14

    Uses

    • Environmental – Predator traps, predator proof fences, gates, fish passages
    • Livestock Transport – Protects crates and gates from corrosion. Lubricates and protects locks and hinges
    • Stainless Work – Prevents tea staining on polished stainless steel
    • Machinery and Components – Machinery operating under corrosive conditions, all threaded devices exposed to corrosion, machinery storage. Thread, screw and rivet type fasteners. Metal protection, machinery maintenance, chains and gears, anti-seize and release agent. Treated components dismantle years later with little effort
    • Marine – Rigging, boat trailers, springs and axles, external marine fittings, marine electrics. Outboards, cables, electronics, fishing equipment, rollers, trailers
    • Engineering – Anti-spatter properties make it ideal for welding, drilling and cutting. Wheel-valves, fire hydrant valves, flange nuts and bolts exposed to harsh conditions. Mould release and protection
    • Automotive – Alloy threads, battery terminals, tools
    • Home – Aerials and antennas, camping and sporting equipment, hinges, locks, garage doors. Galvanised underfloor fixings and bolts
    • Electrical – Protects PCBs, swich gear, inhibit oxidisations and salt crystallisation, corrosive atmospheres
    • Concrete – Use as release agent to keep shovels and other tools clean between uses. Inhibits corrosion on tools
    • Agricultural – Irrigation equipment, farm machinery, sawblades, firearms, cultivators, conveyors, slashers, equipment for aquacultural farming.
    Contact Us
  • 3020

    Out of stock

    CRC LanoCote is an environmentally friendly product which exhibits superior corrosion protection and anti-seize properties. It offers outstanding, long-lasting protection in harsh conditions without compromising treated materials or harming the environment.

    Blended from lanolin, an all-natural product, CRC LanoCote is non-toxic, non-carcinogenic and biodegradable. It does not contain copper, lead, silicones, acids, kerosene or dieselene and does not harm metals, plastics, paints, fibreglass, rubber, neoprene, formica and other synthetic materials.

    Lanolin is naturally hydrophobic (water-repellant) and due to its affinity to metals, CRC LanoCote forms a highly effective moisture barrier on surfaces, stays flexible and does not dry out or wash off.

    CRC LanoCote provides long-term natural protection for metals from corrosive effects of salt, acids and most alkalis and inhibits oxidation and galvanic corrosion even in extreme corrosive conditions. It provides superior natural protection for machinery and threaded devices exposed to corrosion. It is unmatched in saltwater environment – ideal for all marine applications.

    CRC LanoCote acts as a release agent and thread-lubricant with excellent anti-seize properties to prevent galling and seizure. Applied during assembly, CRC LanoCote will greatly assist in disassembly years later.

    CRC LanoCote is entirely passive with no conductive ingredients. CRC LanoCote’s natural composition and odour makes it pleasant to work with and does not effect the environment or repel wildlife.

    Features & Benefits

    • Environmentally friendly – Blended from natural and other non-toxic ingredients, biodegradable, pleasant natural odour
    • Safe – Non-toxic, non-carcinogenic
    • Harmless to material – Does not harm metals, plastics, paints, fiberglass, rubber, neoprene, formica and other synthetic materials
    • Ready to Use – No additional mixing or chemical additives required
    • Versatile – Corrosion inhibitor, anti-seize, release agent, lubricant
    • Powerful – Heavy-duty protection in harshest conditions
    • Long-lasting – Protecting film does not dry out or wash off
    • Non-conductive, non-static – Suitable for electrical work
    • Anti-spatter properties – Great for cutting, welding or drilling work
    • Hydrophobic (water-repellant) – Promotes water displacement from surfaces and waterproofs
    • Highly resistant to humidity, salt water and salt spray – Ideal for marine applications
    • Wide range of Applications – Industrial, engineering and construction, agriculture and farming, marine, automotive and numerous other indoor and outdoor uses
    • MPI Approved C14

    Uses

    • Environmental – Predator traps, predator proof fences, gates, fish passages
    • Livestock Transport – Protects crates and gates from corrosion. Lubricates and protects locks and hinges
    • Stainless Work – Prevents tea staining on polished stainless steel
    • Machinery and Components – Machinery operating under corrosive conditions, all threaded devices exposed to corrosion, machinery storage. Thread, screw and rivet type fasteners. Metal protection, machinery maintenance, chains and gears, anti-seize and release agent. Treated components dismantle years later with little effort
    • Marine – Rigging, boat trailers, springs and axles, external marine fittings, marine electrics. Outboards, cables, electronics, fishing equipment, rollers, trailers
    • Engineering – Anti-spatter properties make it ideal for welding, drilling and cutting. Wheel-valves, fire hydrant valves, flange nuts and bolts exposed to harsh conditions. Mould release and protection
    • Automotive – Alloy threads, battery terminals, tools
    • Home – Aerials and antennas, camping and sporting equipment, hinges, locks, garage doors. Galvanised underfloor fixings and bolts
    • Electrical – Protects PCBs, swich gear, inhibit oxidisations and salt crystallisation, corrosive atmospheres
    • Concrete – Use as release agent to keep shovels and other tools clean between uses. Inhibits corrosion on tools
    • Agricultural – Irrigation equipment, farm machinery, sawblades, firearms, cultivators, conveyors, slashers, equipment for aquacultural farming.
    Contact Us
  • 3013

    Out of stock

    CRC Soft Seal provides a dry transparent, amber waxy film for heavy protection of parts that will not wash or wipe off even in severe conditions. It is a premium heavy-duty, long-term, indoor/outdoor corrosion inhibitor for machined metal surfaces and assemblies subjected to long periods of storage or adverse shipping conditions. It is highly resistant …

    CRC Soft Seal Aerosol 400 mlRead More

    Contact Us
  • 3003

    Out of stock

    CRC Food Grade 5.56 is an effective and efficient multi-use product that penetrates, lubricates and loosens rusted parts, prevents corrosion and displaces moisture. The highly refined white mineral oil forms a thin film that lubricates moving parts for smooth action and silences annoying squeaks and squeals. Superior penetrating power breaks through rust and corrosion, loosens rusted parts, displaces water from wet equipment and cleans away scale and dirt. It protects metals from corrosion caused by humidity and other corrosive atmospheres.

    Temperature range from -20°C to +150°C (continuous), +170°C (intermittent). MPI Approved C15. NZ AsureQuality assessment for food/beverage including dairy factories with incidental contact.

    Features & Benefits

    • Lubricates moving parts for smooth action – Silences annoying squeaks and squeals
    • Penetrates quickly – Breaks away rust and corrosion, frees components bonded by dirt and scale
    • Eliminates the need for many disassembly operations
    • Leaves protective thin film that clings to surfaces – Ongoing protection against corrosion
    • Displaces moisture to help start wet engines
    • Cleans & protects surfaces
    • Non silicone – Will not harm paint, plastic or wood surfaces. Easier clean-up and removal of excess oil. Allows treated surfaces to be repainted
    • 360 degree valve – Aerosol can be sprayed from any position even upside down
    • Non-toxic, colourless, odourless, tasteless
    • Temperature Range – Effective from -20°C to +150°C (continuous), +170°C (intermittent)
    • MPI Approved C15
    • NZ AsureQuality assessment for food/beverage including dairy factories with incidental contact

    Uses

    • Recommended for use on all food processing and handling equipment directly exposed to food products
    • Chutes, guides, rails, conveyors, bottling machinery, fridges, freezers, scales, fans, carts, galleys, fillers, ovens, stoves, racks, cooking applicances

    Product Literature

    Contact Us
  • 2019

    Out of stock

    CRC Electrical Parts Cleaner is a quick-drying, non-chlorinated evaporating parts cleaner for use on electric motors and other heavy-duty electrical and mechanical equipment. It swiftly and effectively degreases, removes oil, dirt, wax and other foreign matter that are common causes of current leakages and electric inefficiencies. Extremely flammable. Features & Benefits Safe on most plastics …

    CRC Electrical Parts Cleaner Aerosol 400 gRead More

    Contact Us
  • 2018

    Out of stock

    CRC Lectra Clean is a non-flammable heavy-duty evaporating cleaner and degreaser for use on electric motors and other heavy-duty electrical and mechanical equipment. The stabilised fast-acting solvent blend effectively removes wax, grease, oil, dirt, moisture and foreign matter that are common causes of current leakages and electric inefficiencies. It minimises downtime by cleaning low-voltage motors …

    CRC Lectra Clean Aerosol 400 mlRead More

    Contact Us
  • 2016

    Out of stock

    CRC2016 CO Contact Cleaner is a plastic-safe general-purpose evaporating cleaner and degreaser for use on sensitive electronic and electrical equipment. It is formulated to quickly penetrate into hard-to-reach areas and effectively flush away carbon deposits, dirt, light oils, dust, lint and other light contaminants.

    CRC CO Contact Cleaner as part of a regular maintenance programme will eliminate carbon deposits and other contaminants that hold moisture and cause corrosion or arcing. An increase in resistance will indicate the frequency of re-application.

    Use on de-energised equipment only.

    Food Grade option available for this product

    Features & Benefits

    • Safe for use on most plastics
    • Quickly penetrates into hard-to-reach areas
    • Rapid and complete evaporation – Leaves no residue, no rinsing or wiping required
    • Low in toxicity
    • High purity formula
    • Chemically stable, inert
    • Non-conductive
    • Non-corrosive
    • Non-staining
    • Contains no lubricants, silicones, oils
    • MPI Approved C12
    • Includes Permastraw™ Dual-Action Spray System – One piece actuator with two-way spray that ensures that straw stays in place.

    Uses

    • Cleans and Degreases – Electronic and electrical components such as connectors, contacts, terminals, motors, plugs, jacks, printed circuit boards, potentiometers, sensors, etc. used in:
    • IT equipment – Computers, printers, fax machines, memory cards, server room equipment, etc.
    • Switch boards
    • Sound equipment – PA gear, TV, DVD machines, Home theatre equipment
    • Appliances repair and maintenance – Washing machines, dryers, dish washers, vacuum cleaners, etc.
    • Hospital and health care equipment – Diagnostic imaging equipment, hearing aids, etc.
    • Alarm systems
    • Navigation equipment
    • Laboratory and test equipment
    • Automotive Repair
    • Marine
    • Heavy mining equipment
    • Effectively removes carbon deposits, light oils, dirt, dust, lint, fingerprints, flux, polar soils
    Contact Us
  • 1224

    Ex Supplier

    Pour CRC FiberLock® directly into your radiator for a fast, permanent repair. CRC FiberLock® works on head gaskets, engine blocks, intake gaskets, cylinder heads, freeze plugs, heater cores and coolant leaks and features a powerful 3-tier formal compatible with all types of antifreeze. Repairs leaks using three unique technologies: Military-Strength Fibres Proprietary lightweight fibres with a high strength-to-weight ratio …

    CRC FiberLock Head Gasket & Block Repair Bottle 946 mlRead More

    Add to cart
  • SX128

    Out of stock

    CRC Salt Terminator Engine Flush, Cleaner & Corrosion Inhibitor cleans & protects anything exposed to salt.  Salt water, salt air and road salt can lead to rust, corrosion, vehicle damage and costly repairs. CRC Salt Terminator dissolves destructive salt debris that can’t be removed by water alone and leaves a protective corrosion-inhibiting coating, guarding against future corrosion. CRC …

    CRC Salt Terminator Bottle 3.7 litreRead More

    Contact Us
  • AS-400

    1 in stock

    Heavy Duty, Non-Melting Formulation, Seals & Protects, Prevents Galling and Seizing, Reduces Torque, Chemical Resistant, Copper Anti-Seize Lubricant Prevents Rust and Corrosion, Excellent Lubricity

    Barcode: 790920781942

     

    Add to cart
  • PFC105SE

    9 in stock

    This is an Aersol so is unable to be delivered by our Courier, Pickup is available from Henderson, Auckland. TRW Aftermarket Brake Cleaner: formulated to clean, not to pollute Fast acting, effective and developed with environmental concerns very much in mind, TRW Brake Cleaner is the market leading essential choice. Removes dirt rapidly and thoroughly …

    TRW Brake Clean 500ml AerosolRead More

    Add to cart
  • SX32M

    Out of stock

    CRC Salt Terminator Engine Flush, Cleaner & Corrosion Inhibitor cleans & protects anything exposed to salt.  Salt water, salt air and road salt can lead to rust, corrosion, vehicle damage and costly repairs. CRC Salt Terminator dissolves destructive salt debris that can’t be removed by water alone and leaves a protective corrosion-inhibiting coating, guarding against future corrosion. CRC …

    CRC Salt Terminator Bottle 946 ml (Includes Mixer)Read More

    Contact Us
  • PFC105

    Ex Supplier

    Removes dirt rapidly and thoroughly
    CFC and Trichloroethane free
    Fast evaporating
    Safe on rubber components
    Efficient and easy to use at any angle

    Add to cart
  • SX32

    Out of stock

    CRC Salt Terminator Engine Flush, Cleaner & Corrosion Inhibitor cleans & protects anything exposed to salt.  Salt water, salt air and road salt can lead to rust, corrosion, vehicle damage and costly repairs. CRC Salt Terminator dissolves destructive salt debris that can’t be removed by water alone and leaves a protective corrosion-inhibiting coating, guarding against future corrosion. CRC …

    CRC Salt Terminator Bottle 946 mlRead More

    Contact Us
  • WD71140

    Out of stock

    The Solvol Bar is the original heavy-duty pumice bar. Solvol contains natural citrus oils and cleans it all – paint, ink, solvents, tough dirt, grease and grime. NOTE: This item has now been discontinued by the manufacturer  

    Contact Us
  • SW4

    Out of stock

    The SmartWasher Bioremediating Parts Washing System is both self-cleaning and environmentally friendly. The pH neutral cleaner called OzzyJuice is used to effectively clean parts, removing grease and grime while the naturally occurring process of bioremediation is used to turn those potentially hazardous contaminants into a harmless by-product of carbon dioxide and water. Simply put, the …

    CRC OzzyJuice SW-4 20 LitreRead More

    Contact Us
  • SX22

    Out of stock

    CRC Salt Terminator Engine Flush, Cleaner & Corrosion Inhibitor cleans & protects anything exposed to salt.  Salt water, salt air and road salt can lead to rust, corrosion, vehicle damage and costly repairs. CRC Salt Terminator dissolves destructive salt debris that can’t be removed by water alone and leaves a protective corrosion-inhibiting coating, guarding against future corrosion. CRC …

    CRC Salt Terminator Trigger 650 mlRead More

    Contact Us
  • SX100H

    Out of stock

    CRC Salt Terminator Engine Flush, Cleaner & Corrosion Inhibitor cleans & protects anything exposed to salt.  Salt water, salt air and road salt can lead to rust, corrosion, vehicle damage and costly repairs. CRC Salt Terminator dissolves destructive salt debris that can’t be removed by water alone and leaves a protective corrosion-inhibiting coating, guarding against future corrosion. CRC …

    CRC E-Z Hose Bottle 1 litreRead More

    Contact Us