Brand: Penrite
Penrite
Penrite is a premium oil supplier based in Australia
Showing all 30 results
-
Penrite
-
Penrite
Add to cartKey Specifications: Glysantin® G30®, G12+, VW TL 774-F. 8 Year 500,000km drain intervals if used and maintained at 50% OEM Approved to maintain manufacturer’s warranty & specifications Compatible with plastics, rubbers and seals. See full description on penrite.com.au
-
Penrite
Add to cartAuto Trans Stop Leak has been specifically formulated to control leaks in automatic transmission systems due to deteriorating or worn seals and gaskets.
APPLICATION
Auto Trans Stop Leak has been designed for use in conventional automatic transmissions units. It is suitable for cars, 4WDs, and light commercial vehicles.
Auto Trans Stop Leak is suitable for use with vehicles that use the following Penrite automatic transmission fluids –
- Penrite ATF BMV
- Penrite Multi-Vehicle DX-III
- Penrite Multi-Vehicle LV
- Penrite Multi-Vehicle MHP
- Penrite Multi-Vehicle FS
- Penrite ATF 33 Type F
- Penrite ATF Top Up
- Penrite Classic ATF
Note: Cannot be used in CVT or DCT type transmissions.
FOR BEST RESULTS:
- One 375ml bottle treats up to 10 litres of transmission fluid.
- Add one bottle (375ml) through transmission filling point.
Note:
If leaks are still evident after use, replacement or repair of the transmission may be required -
Penrite
Add to cartKey Specifications: Audi TL 774-F (G12+), VW TL 774-F (G12+), Caterpillar EC-1. Compatible with all coolant types. Will not discolour original coolant.* Compatible with plastics, rubbers and seals. * See full description click here
-
Penrite
Add to cartKey Specifications: Glysantin® G30®, G12+, VW TL 774-F. 8 Year 500,000km drain intervals if used and maintained at 50% OEM Approved to maintain manufacturer’s warranty & specifications Compatible with plastics, rubbers and seals. See full description on penrite.com.au
-
Penrite
Add to cartRubber Grease is a premium quality, NLGI No. 2, general purpose, non- harmful clay based grease containing castor oil for use when contact with natural and/or synthetic rubber is likely to occur. APPLICATION Rubber Grease can be used for automotive, industrial and consumer rubber parts such as hydraulic dust covers, braking system components, seals and washers. It is specially designed for use on rubber components in hydraulic systems where compatibility with the …
-
Penrite
-
Penrite
Add to cartKey Specifications: Glysantin® G40®, G12++, VW TL 774-G. See all specifications 8 Year or 500,000 km (whichever comes first) drain intervals if used and maintained at 50% OEM Approved to maintain manufacturer’s warranty & specifications Compatible with all plastics, rubbers and seals * See full description click here
-
Penrite
-
Penrite
Add to cartKey Specifications: Glysantin® G40®, G12++, VW TL 774-G. See all specifications 8 Year or 500,000 km (whichever comes first) drain intervals if used and maintained at 50% OEM Approved to maintain manufacturer’s warranty & specifications Compatible with all plastics, rubbers and seals * See full description click here
-
Penrite
-
Penrite
Add to cartDemineralised Water is a clear, colourless and odourless purified water that has been refined by removing harmful mineral ions, salts and other impurities such as Calcium, Magnesium, Sodium, Chloride, Sulphate, Nitrate and bicarbonate that can cause destabilisation of other chemicals with which it is mixed. It is also known as deionised water and used in OEM Approved coolant Premix solutions. APPLICATION Demineralised …
-
Penrite
Add to cartKey Specifications: AS 2108-2004 Type B. See all specifications Lowers engine operating temperatures preventing damage Leaves no slippery residue if dropped on a race track Contains a conventional hybrid inhibitor * See full description click here
-
Penrite
-
Penrite
Add to cartRadiator Flush is a fast acting (7 Minute), alkaline cooling system cleaner designed to remove rust, scale and other deposits from automotive cooling systems that could block or foul circulation of coolant though the radiator or engine.
APPLICATION
Radiator Flush is recommended to clean out the cooling system of all types of passenger cars, 4WD’s, light & heavy duty commercial vehicles, motorcycles, agriculture, mining, construction and stationary engines.
Radiator Flush is designed to be used prior to new coolant being added to the vehicles cooling system as this will ensure the cooling system is free from rust, scale or any other residue which could block or foul the cooling system and prevent the new coolant from functioning as intended. It will also neutralise any leftover coolant remaining in the engine eliminating compatibility issues if changing coolant types.
Radiator Flush can also be used where any type of coolant has been present in the cooling system and is harmless to all metals, rubber, plastic and seals. We recommend refilling with a quality OEM approved Penrite anti-freeze anti-boil coolant such as –
Red OEM Coolant (OEM Approved) Premix
Red OEM Coolant (OEM Approved) Concentrate
Green OEM Coolant (OEM Approved) Premix
Green OEM Coolant (OEM Approved) Concentrate
Blue OEM Coolant (OEM Approved) Premix
Blue OEM Coolant (OEM Approved) Concentrate
350,000KM Green Coolant Premix
350,000KM Green Coolant Concentrate
Universal Top Up Premix
RCI100,000 KM ConcentrateINSTRUCTIONS FOR USE
Use 1 bottle for up to 15 Litres capacity
- Drain Cooling System
- Refill radiator with clean water
- Add Radiator Flush to cooling system
- Start Engine and turn on heater
- Run engine for 10 – 15 minutes, this includes 7 minutes cleaning time
- Turn off engine, allow to cool
- Drain cooling system
- Refill with appropriate Penrite Coolant
NOTEÂ – Please read Product Information sheet for more detailed Instructions
-
Penrite
Contact UsPenrite Rubber Greaseis a premium quality, NLGI No. 2, general purpose, non- harmful clay based grease containing castor oil for use when contact with natural and/or synthetic rubber is likely to occur.
APPLICATION
Penrite Rubber Grease can be used for automotive, industrial and consumer rubber parts such as hydraulic dust covers, braking system components, seals and washers. It is specially designed for use on rubber components in hydraulic systems where compatibility with the rubber seals is essential. It is also suitable for use with other rubber components such as gaiters or boots used on these systems. It is also ideal for use as an automotive tyre mounting aid.
Penrite Rubber Grease is also recommended in other applications where the resistance to hydrocarbon solvents is required, such as automotive shock absorbers.
Penrite Rubber Grease can be used in the assembly of platen rollers used in the printing industry. This type of grease is used as a lubricant to aid the insertion of the steel mandrel into the very tight rubber outer.
NOTE: Penrite Rubber Grease is NOT recommended for the lubrication and protection of brake backing plates and plunger housings.
RECOMMENDED OPERATING RANGE
- -9° to 80°.
-
Penrite
-
Penrite
Add to cartPower Steering Stop Leak has been specifically formulated to control leaks in the power steering system due to deteriorated or worn seals and gaskets.
APPLICATION
Power Steering Stop Leak has been designed for use in power steering systems that utilise Automatic Transmission Fluids (ATF‘s) as the power steering fluid. It is suitable for passenger cars, 4WD’s, and light commercial vehicles.
Power Steering Stop Leak is suitable for use with vehicles that use the following Penrite power steering and automatic transmission fluids as well as most systems that use GM Dexron® type fluids that are utilised in power steering systems –
- Penrite Power Steering Fluid”
- Penrite Multi-Vehicle DX-III
- Penrite Multi-Vehicle LV
- Penrite Multi-Vehicle MHP
- Penrite ATF BMV
- Penrite Multi-Vehicle FS
- Penrite ATF 33 Type F
- Penrite ATF Top Up
- Penrite Classic ATF
Power Steering Stop Leak will not affect the performance of the Power Steering System
FOR BEST RESULTS:
1) Ensure the reservoir has 375ml capacity prior to filling.
2) Add one bottle (375ml) for up to 1 litre of power steering fluid.NOTE:Â If leaks are still evident after use, replacement or repair of these parts may be required.
-
Penrite
Add to cartEngine Flush is a solvent free, engine cleaning formulation that removes engine deposits, sludge and contaminants with the oil service drain. It contains added zinc for engine wear protection and its fast acting formulation works in 10 minutes. The solvent free formulation protects gaskets and seals from damage during the cleaning process. APPLICATION Engine Flush is designed for use in all engine types in passenger cars, 4WD’s, …
-
Penrite
-
Penrite
Add to cartPetrol Injector Cleaner is a multi-purpose petrol fuel treatment that is designed to clean fuel injectors and carburettors in one tank of fuel whilst protecting fuel system components. Its unique formulation improves fuel economy by up to 2.4% on unleaded & E10 fuel and provides for engine power increases of up to 2.6%.
APPLICATION
Petrol Injector Cleaner is designed for use in all petrol engined passenger cars, 4WD’s, light & heavy duty commercial vehicles, motor cycles, marine and stationary engines.
Petrol Injector Cleaner has special synthetic detergents that clean blocked fuel injectors and carburetor jets to restore lost power. It also provides for easier starting, smoother idling and better fuel economy.
Petrol Injector Cleaner has a unique formulation that protects the fuel system against rust and corrosion especially in systems using ethanol fuel blends such as E10. It reduces intake valve deposits allowing optimum air fuel mixture and increases combustion efficiency resulting in improved power output.
Petrol Injector Cleaner is suitable for unleaded petrol / LPG (Duel Fuel) and E10. It is not suitable for E85 or E100 fuels. It is safe for use with catalytic convertors and oxygen sensors.
FOR BEST RESULTS
- Add prior to filling the fuel tank.
- If fuel injectors are excessively blocked or fouled, use two bottles (2 x 375ml) for up to 60 litres of fuel. This will provide rapid clean up and restoration of performance.
- For regular fuel system maintenance use at the rate of one bottle (1 x 375ml) for up to 60 litres of fuel, every 2500 – 3000km.
- For complete fuel system clean, use Penrite Petrol Total System Cleaner
Please Note:Â If your vehicle is fitted with a Capless Fuel Filler system, we recommend using the vehicles emergency fuel filling funnel when adding this product to the fuel tank.
-
Penrite
Add to cartRadiator Stop Leak is a high quality water based sealant designed for temporarily fixing leaking cooling systems. Its fast acting formulation effectively seals radiators, heater cores, weeping head gaskets, hose joints and welsh plugs in automotive engines preventing major damage from loss of coolant and engine overheating.
APPLICATION
Radiator Stop Leak is suitable for all types of motorcycles, passenger cars, 4WDs, light and heavy duty commercial vehicles, construction, mining ,agricultural and stationary engines.
Radiator Stop Leak is suitable for use with all types of materials including aluminium, cast iron, copper, brass, plastics & rubber hoses. One x 375 ml bottle will treat between 6 & 12 litres.
Radiator Stop Leak will not block cooling system passages and is compatible with anti-freeze anti-boil solutions. If cooling system has lost fluid prior to Radiator Stop Leak being used , we recommend refilling with a quality Penrite Anti-Freeze Anti-Boil coolant such as
- 8 Year Red Anti-Freeze Anti-Boil (OEM Approved)
- 7 Year Green Anti-Freeze Anti-Boil (OEM Approved)
- 7 Year Blue Anti-Freeze Anti-Boil (OEM Approved)
- 350,000KM Green Anti-Freeze Anti-Boil
- HD EC-01 Anti-Freeze Anti-Boil
- PGXL Coolant
- Universal Top Up Premix
Instructions for Use:
- Remove radiator cap
- Shake bottle well prior to using.
- Start engine and run, with heater on, for 2 minutes
- Add contents directly to the radiator.
- Refill radiator and refit radiator cap
- Leave engine and heater on for 5 minutes.
- Please dispose of bottle thoughtfully.
Note:
Penrite Radiator Stop Leak is designed as a temporary repair and does not replace the need for mechanical repairs. If leaks are still evident after use, replacement or repair of faulty parts may be required.
-
Penrite
-
Penrite
Add to cartEngine Stop Leak has been specifically formulated to control engine oil leaks due to deteriorated or worn seals and gaskets including the rear main seal. It provides a temporary seal to prevent loss of lubricating fluid and possible engine seizure or failure resulting in costly repairs.
APPLICATION
Engine Stop Leak is suitable for use in motorcycles, passenger cars, 4WD’s, light commercial vehicles and stationary engines and has been designed for use in petrol, diesel, LPG and dual fuel engines.
Engine Stop Leak is compatible with and will readily mix with Mineral, Semi Synthetic and Full Synthetic engine oils. It is safe to use with all metal types including Cast Iron, Aluminium & Magnesium.
Engine Stop Leak gently revitalises worn and deteriorated gaskets and seals to prevent leaks and can reduce the risk of engine fire and excessive smoke from leaking oil onto extremely hot exhaust system manifolds, catalysts and pipes.
NOTE: Engine Stop Leak is NOT RECOMMENDED for VVTI petrol engines or diesel engines with oil operated injector pumps.
FOR BEST RESULTS
- Add one bottle (375ml) to engine through oil filler point.
- One bottle treats up to 6 litres of engine oil.
- Use regularly at every oil change for maximum benefit
-
Penrite
Add to cartDemineralised Water is a clear, colourless and odourless purified water that has been refined by removing harmful mineral ions, salts and other impurities such as Calcium, Magnesium, Sodium, Chloride, Sulphate, Nitrate and bicarbonate that can cause destabilisation of other chemicals with which it is mixed. It is also known as deionised water and used in OEM Approved coolant Premix solutions. APPLICATION Demineralised …
-
Penrite
-
Penrite
Add to cartEnviro+ DPF Cleaner is a Patented, liquid bimetallic platinum & cerium catalyst, diesel fuel additive specifically formulated to clean blocked DPF’s (Diesel Particulate Filters) as well as improve the operation and reduce maintenance of the DPF & emissions control systems in diesel engine applications. Its formulation is soluble and stable in traditional diesel & bio-diesel fuels. It cleans and assists in regeneration of …
-
Penrite
Add to cartDemineralised Water is a clear, colourless and odourless purified water that has been refined by removing harmful mineral ions, salts and other impurities such as Calcium, Magnesium, Sodium, Chloride, Sulphate, Nitrate and bicarbonate that can cause destabilisation of other chemicals with which it is mixed. It is also known as deionised water and used in OEM Approved coolant Premix solutions. APPLICATION Demineralised …
-
Penrite
-
Penrite
Add to cartDiesel Injector Cleaner is a multi-purpose diesel fuel treatment that combines an advanced set of additives to clean and protect diesel fuel system components. It effectively cleans the whole fuel delivery system including injectors and fuel pumps extending the life of the fuel system components. It provides improved fuel economy, increases power, lowers emissions, makes starting easier, provides smoother idling and prevents against detonation damage.
APPLICATION
Diesel Injector Cleaner is designed for use in all diesel engines in passenger cars, 4WDs, light & heavy duty commercial vehicles, tractors, mining & construction equipment, farm equipment, marine and stationary engines. It can be used in all diesel injection systems including direct injection and common rail injection systems.
Diesel Injector Cleaner has a powerful cleaning agent that cleans from the fuel tank right through to the injectors. It cleans up carboxylate salts that cause sticking in diesel injectors and removes deposits from the injector nozzles providing the optimum uniform spray pattern from the injector. This provides for maximum power and economy from the engine.
Diesel Injector Cleaner conditions the diesel fuel improving its combustion quality which provides for power and economy increases. It can improve fuel economy by up to 2.5%.
FOR BEST RESULTS:
- Add prior to filling the fuel tank
- If fuel injectors are excessively blocked or fouled, use one bottle (375ml) for up to 75 litres of diesel fuel. This will provide rapid clean up and restoration of performance
- For regular fuel system maintenance use one bottle (375ml) for up to 200 litres of diesel fuel, every 2500km.
- Over usage will not cause damage
- For complete fuel system clean, use Penrite Diesel Total System Cleaner
Please Note:Â If your vehicle is fitted with a Capless Fuel Filler system, we recommend using the vehicles emergency fuel filling funnel when adding this product to the fuel tank.
For blocked DPF‘ we recommend Penrite Enviro+ DPF Cleaner